This switch is completely designed in accordance with industrial standards and can be used as industrial switches.Strong anti -interference ability can work normally in a completely sealing and strengthening interference environment.And accidents cause the crash to restart the state within 0.01 seconds.Work temperature: -45 to 85 degrees, working humidity: 5-95% Work height: below 2000m above sea level
The web version management visualized page non -command line mode is simpler and intuitive.
LACP converges refers to NAS or computer devices merged multiple networks into a network cable to improve transmission efficiency.You also need to have a soft router or other routers to support the convergence of broadband, and you need to debug it.There is no router function for simple switches.
The difference between GS8 and GS8P is that GS8P supports dynamic LACP, and GS8 only supports static LACP.If there are NAS multi -line gathering needs, you can buy GS8P.Just divide VLAN or software routing to expand WAN to meet the needs.At the same time, the GS8P uses better new architecture performance and smooth interface power consumption can be reduced by half. The GS8P new firmware complete Chinese version has been launched. download.
The configuration file of the store has not been fully improved, and now only a manual is provided.(If the computer is turned on SMB3.0, there is not much difference in use)The power consumption of power consumption comparison networks is two to ten times low. In the case of air circulation, there is almost no temperature in the fuselage, but don''t underestimate this power consumption for a year of power.
GS8PE is 8 international standard IEEE802.3AF/AT automatic compatibility ordinary devices will not burn the device(GS8P POE version), When 12V power supply, POE does not take effect and only starts the switch(Do not guarantee the effect of use)EssenceWhen 36V voltage is required, the POE will be activated. The recommended voltage 48-58V current 2A-5A power supply(100-200W), A single -network power supply upper limit of 30W.Actually, the power distribution source can be used(It is recommended to buy a power version directly), Bring two or three cameras can also be used by about 50W, and the general camera is within 7-15W.POE power supply uses the order of power, which has low power requirements.GS8PE does not support USB power supply.Because the power supply voltage of POE power supply is relatively high, the DC port will be used to make an electric spark. This is normal. It is recommended(AC)EssenceThis machine''s standby power consumption 3-4W(Conductor loss)Essence
This price can only buy a certain TP A certain water A fool plastic shell switch of a certain brand
Metal housing small body(14*7.8*2.8cm)Function supports VLAN division Port convergence Mirror image
Low power consumption without heating GS8 power consumption<2W full load<3W/GS8P power consumption<1W full load<2W(Conductor loss)
Select the cabinet installation kit U -shaped guide rail DIN35mm buckle+DC wiring terminal head
The actual use of the switch is exactly the same as the network of NetGear network GS108E performance
The switch supports power from NAS \ Computer \ Light Cat USB Port to reduce the socket occupation of the socket(POE version except)
Switch supports fan voltage 5V-15V Concentrated power supply is convenient, and there is no need to consider the problem of too low non -end voltage
Switch attached Common Soft route ESXI configuration file supports the trouble of one -click import from the one -click import
The switch is also supported, plug and use a fool switch
The switch also uses the American brand that is not bad to choose the big as IQ tax.
The switch provides only one -year quality problems and does not repairs.