The advantage of bilateral measurement is that the measurement of the left and right legs is divided into two independent parts, so we can get the power data of each leg.In our laboratory, AxPower can analyze the power phase of each leg.The difference between AxPower and Pioneer and 4III is that there is only one data processing unit.The design of the single -processing unit can simply and effectively ensure the stability and simultaneousness of bilateral data, and avoid many unnecessary troubles. Yes, Shimano and Rotor are also the design.The mid -axis power meter is currently divided into two categories, one is to paste the strain meter directly on the inner wall of the middle shaft, such as axpower, and the other is to fix the mechanical structure of an induction strain inside the central axis, and then measure the deformation of this mechanical structure.For example, foreign Dynovelo.We believe that the installation method of direct installation has higher accuracy and stability. Like the principle of the rear flower drum power meter, the measurement of the torque is very clean and the interference signal is less.AxPower is characterized by bilateral measurement, using the middle shaft to measure the left leg, and using the right curvature handle to measure the right leg. This solution is similar to the 2inpower of Rotor. There is a difference: our definition of AxPower is a set of installation solutions, not only not onlyIt''s just a power meter.In other words, as long as it is a hollow structure, the metal tooth drive on the mid -axis connecting the drive side can be installed.There are still many tooth trays that can be installed with AXPOWER, such as Shimano''s old road series, mountain series, CP Potenza and Praxis Works tooth tray.Due to the workload, we currently only support9100,9000, 8000, 6800, 5800
Evaluation detailed video:
http://v.17173.com/v_102_612/Mzg1NTYxMDU.html(Click I open in the new window)