【Product name】 Waterproof Bicycle Computer
【Material】 Engineering plastics electronic components
【display】 LCD display
【size】 46mm*45mm*19mm
【weight】 About 100G
【colour】 As shown
【Configuration】 Watch body, watch holder (wired with induction probe), induction magnet, cable tie, Chinese manual
14 functions:
1. Record driving speed
2. Record the total mileage
3. Record a single mileage
4. Display the maximum driving speed
5. Display the average speed of driving
6. Display driving time
7.12/24 hour clock
8. Automatic cycle function
9. Kilometer or mile setting
10. Tire circumference setting
11. Initial value setting of total mileage
12. Driving data sampling function
13. Maintenance reminder function
14. Automatic switch machine (automatically shut down after 300 seconds when the vehicle is not running, when the vehicle is moving or press any key, it can be restored to the mode before starting, and the values ??before starting the machine will be memorized)
installation tips:
1. Install the meter head base on the handlebar;
2. Insert the AG13 button battery into the battery slot on the back of the meter
3. Initialize the code table data, generally only need to set the tire circumference as a parameter, it can be used normally. For electric vehicles, please use a soft ruler to measure the circumference of the wheel outer ring;
3. Insert the meter head into the slide groove of the meter head seat;
4. Install the sensor on the front fork, with the sensor head facing the spokes;
5. The induction magnet is installed on the spokes, aligned with the induction head, and the distance is about 5 mm;
6. Fix the cables with nylon cable ties;
7. Check whether the above meter head base, sensor and induction magnet are installed firmly. This package comes with necessary rubber gaskets and detailed instructions in Chinese and English to ensure your installation is successful.
8. For more functions, please refer to the manual settings
Setting function
1. Install the battery into the battery slot on the back of the meter;
2. Press the right button within 15 seconds to enter the tire circumference setting;
3. Refer to the wheel diameter and circumference comparison table. For example, the wheel circumference of the 28 model is 224cm, press the left button to set the three-digit value to 224(The machine defaults to 208cm)
4. Right click to confirm;
5. For more functions, please refer to the manual settings.