\ \
Note: The newly purchased three-energy bakeware may be slightly deformed within 30 to 90 days of initial use. This is a normal phenomenon of metal expansion and contraction. It is not a product quality problem. It can be restored after a period of use. normal
\ \
SN1542 is a special non-stick treatment bakeware, SN1070 is a special non-stick treatment bakeware, SN1072 is a non-stick treatment bakeware, SN1071 is an anodized bakeware, the size of the bakeware is 40*60, the height is 2 cm, and the material is 1.5MM thick. . Right-angled edges. The service life and non-stick effect of super non-stick are three times that of non-stick, and the service life and non-stick effect of special non-stick are twice as long as non-stick!
\ \
\ \
\ \
\ \
\ \\\ Product number \ | \\ product name \ | \\ Material \ | \\ specification \ | \\ Surface treatment \ | \\ Original price \ | \
\\\ SN1071 \ | \\ Aluminum alloy bakeware (anode) \ | \\ 1.5mm aluminum alloy \ | \\ 600*400*20mm \ | \\ Anodizing \ | \\ 86 \ | \
\\\ SN1072 \ | \\ Aluminum alloy bakeware (non stick) \ | \\ 1.5mm aluminum alloy \ | \\ 600*400*20mm \ | \\ Non-stick treatment \ | \\ 107 \ \ \ | \
\\SN1070 | \Aluminum alloy bakeware(Special non-stick) | \1.5mm aluminum alloy | \600*400*20mm | \Special non-stick treatment | \136 | \
\\SN1542 | \Aluminum alloy bakeware(Super non-stick) | \1.5mm aluminum alloy | \600*400*20mm | \Super non-stick treatment | \212 | \
\\DS1510417 | \Aluminum alloy bakeware(Nonstick) | \1.5mm aluminum alloy | \600*400*20mm | \Non-stick treatment | \94 | \
\ \
\ \
\ \
\ \
\ \
\ \
\ \
Features
\ \
●Using high-strength aluminum alloy plate, high strength, high rigidity, good thermal conductivity, sturdiness and durability.
\ \
●Non-stick treatment, easy to demould, easy to clean, and the service life can reach more than 3000 times.
\ \
●It is recommended to apply oil when using it for the first time.
\ \
●Before shooting, please confirm the specifications of your oven.
\ \
Instructions for use
\ \
●Before using for the first time, please check whether the non-stick coating inside the bakeware is cut or damaged.
\ \
●Before each use, please clean the inside and wipe it dry with a soft cloth before use.
\ \
●After each baking, please use a soft cloth or soft plastic scraper to remove the residue in the appliance.
\ \
●Every period of use, it is best to add a small amount of neutral detergent with warm water, and wash the residue thoroughly with a soft cloth.
\ \
●Sanneng general non-stick mold is suitable for baking bread products(Sugar content below 11%).
\ \
Maintenance instructions
\ \
●After washing with water or warm water, wipe or dry it(Must be stored dry).
\ \
●Regularly check the wear condition of the product surface, find the cause of abnormal wear in time and make corresponding adjustments to avoid more serious damage to the non-stick coating, thereby prolonging the service life of the product.
\ \
Precautions
\ \
※Do not use a knife to cut directly, so as not to damage the non-stick coating.
\ \
※Do not use sharp metal products, scouring pads and chemical cleaners to wipe.
\ \
※Do not leave baked or unbaked products in the appliance, because the corrosion products formed by the moisture, sugar and starch accumulated in the product will corrode or oxidize the metal material at the bottom of the non-stick coating, thereby affecting The non-stick effect and service life of the coating.
\ \
※Try to avoid collision and friction caused by careless operation, causing wear or scratches on the non-stick coating.
\ \
※When storing, please handle with care, do not store or even accumulate in damp places, keep the appliance dry.
\ \
※When in use, it should be taken up and down to avoid wear or scratches of the non-stick coating.
\ \
※Operating for a long time under the conditions of high and low temperature difference, the non-stick coating will produce micro cracks, causing residual substances to corrode the non-stick coating, and the non-stick coating will eventually lose its non-stick performance. To avoid this situation, we recommend:
\ \
Note: The newly purchased three-energy bakeware may be slightly deformed within 30 to 90 days of initial use. This is a normal phenomenon of metal expansion and contraction. It is not a product quality problem. It can be restored after a period of use normal
\ \
●If the baking temperature is lower than 250℃, the service life can be prolonged;
\ \
●Avoid uneven heating;
\ \
●Do not burn empty;
\ \
●Do not use high-temperature steam for cooking or cleaning, otherwise the non-stick coating will peel off easily;
\ \
●Do not use salad oil.
\ \