All products in the shop support 7 days + 1 day package return and exchange (However, due to the particularity of some products, such as those with silicone grease at the bottom of the product, and the product with its own thermal conductive sticker,There can be no damage,If the screw has been screwed and there are traces of the screw installation, and the product packaging box is missing, the 7 days + 1 day package is not supported, please pay attention to the buyer.)
Buyers pay attention to:
This is a hub, not a deceleration line, or a speed regulator. Regarding the principle of PWM temperature control, the fan is a 4-pin with a temperature control line. When connected to the motherboard, the fan speed can be automatically adjusted through the motherboard. High temperature high speed, low temperature low speed. But please remember that your 3-pin fan is connected to full speed, because there is no temperature control line control is definitely not temperature control, so please pay attention to it.
The hub is unpackaged and is packaged in a simple ziplock bag. Please pay attention to the buyer.
The picture below shows a 4-way hub
The picture below shows a 5-way fan hub(With RGB colorful lights), Also comes with its own adhesive, the line length is 32 cm
The length of the built-in 4-pin cable is 55CM, Hub module size is 8CM*5CM
The hub power supply interface is the power supply D port. PWM and speed measurement are completed by the built-in 4-pin connection line, so the 4-pin connection line has only 2 wires, one for speed measurement and one PWM temperature control.