Performance and characteristics:
1) Supports LED blinking indication control during data communication. Supports up to a maximum rate of 150Mbps.
2) USB communication protocol, few external components, simpler secondary development design
3)The pin interface package uses a single row of pins with a 2.0mm pitch, which is easy to solder and fix.
4) The ultra-small volume is 17.3mm*31.5mm*3mm, which occupies very little internal space of the product.
5) 1.25V and 3.3V dual voltage power supply, wide voltage range, more stable system.
6)The power consumption is about 500mW low, and the surface temperature of the main chip does not exceed 40 degrees.
7) Using a separate power amplifier circuit, the transmission visual distance is 300 meters.
8) Support two working modes: Infrastructure Mode and Ad Hoc Mode.
9) Good compatibility with ARM, MIPS, X86 and other platforms, providing complete design guidance.
10) Drivers such as Linux 2.6.xx/windows 7/wince 5.0/6.0/Android can be provided.
11) Support WEP 64/128, WPA, WPA2 and other secure encryption connection.
12) The antenna is connected by the I-PEX connector, and the internal or external antenna can be selected flexibly.
13) Support GPIO control on/off WiFi module function.
Typical application of UN5700D-IPEX module:
MID, PMP, UMPC, E-Book, tablet IPAD.
Webcam monitoring;
Smart home;
Handheld devices,
IPTV; IP SET BOX; IP radio;
smart transportation;
Medical equipment;
Digital Frame;
RFID smart card terminal;
Wireless POS machine tax declaration system;
Grid data acquisition and communication;
Modern network education, learning machine.
The link of the power conversion board (15RMB, directly connected to the computer USB port) is as follows:
The pin header of the module is directly inserted into the pin header of the power board. After the wireless module is tested on the board, it can be directly connected to the computer for testing. For product design, no test board is required, and the module is directly welded into the product.This power supply circuit uses a high-efficiency DC/DC chip, the link is as follows:
http://item.taobao.com/item.htm?id=13514538781
The external antennas used for network monitoring are as follows:
The IPEX to SMA and SMA antenna links except the module are as follows:
http://item.taobao.com/item.htm?spm=a1z10.1.w4004-6019736055.15.L9bzRc&id=19081129467
If the antenna needs to be built into the product shell to make the product more beautiful (the antenna placement effect is slightly worse than the black cylindrical antenna described above), the following antennas can be used: