3M glue paste car wiring buckle wire clip driving recorder navigator power cord fixed clip wire management clip
Please note. This connection is Taiwan pure glue double-sided tape(The plastic part is imported and imported from DuPont PA66. In order to make more profits, some merchants purchase cheap PA66 plastic material, and the cost is only 30% of the DuPont price in the United States, and the service life is only more than 2 years. At the end of its life, the quality can be broken just like folding chopsticks. The service life of imported materials purchased by Yongda can reach more than 8 years. Please rest assured!
How to identify the quality of the buckle. One,(First look at the tightness of the double-sided tape. If there are many small holes, it means that the double-sided tape is not strong enough. If it is foam in the middle, there is only a layer of tape on the back and the front. It means that the glue used is very cheap.)The unit price of good quality glue and poor quality. The cost of glue can vary by up to 7 times at most.
two,(Put it directly in the oven. Or in an environment where the temperature is above 40 degrees. The double-sided tape comes off easily. It shows that the quality of double-sided tape is not good Prone to aging.
Double-sided tape uses pure glue. It can be used in an environment of 120 degrees for a long time. Short-term temperature resistance of 150 degrees.
1. This product is suitable for affixed to metal, plastic, glass, wood, shallow-grained plastic, ceramic tiles and other planes. Don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t stick it on the plush, lime wall (because the lime on the lime wall is not strong enough)!
2. It needs to be wiped clean and then pasted. After pasting, try to press for 3 seconds or press the four corners for better pasting effect. Especially the uneven surface because the contact surface with the back adhesive becomes smaller, you must press for more than 1 second, and do not deliberately shake the buckle to try the adhesion when it is just stuck, because the double-sided tape generally takes more than 48 hours to achieve the maximum adhesion and stability. Come down!
Template protection code 0528