NI PCI-6259
16 bits, 1 MS/s (multi-channel), 1.25 MS/s (single channel), 32 analog inputs
- 4 channels of 16-bit analog output (2.8 MS/s); 48 digital I/O lines; 32-bit counter
- NIST calibration certificate and more than 70 signal conditioning options
- NI-MCal calibration technology improves measurement accuracy
- Correlated DIO (32 clock lines, 10 MHz); analog and digital trigger
- Use high-precision M series to improve measurement accuracy, resolution and sensitivity
- NI-DAQmx driver software and NI LabVIEW SignalExpress interactive data logging software
Note that the quotation of this product is only the price of the capture card. If you need junction boxes and cables, please contact the customer and confirm the delivery date of the product! If there is stock in Beijing, it will be shipped within 2-3 working days, if it is out of stock, order The period is 30-50 working days, this product guarantees the original NI product of the United States!
A set of necessary configuration: (2 junction box + 2 cables + 1 NI PCI-6259)
NI PCI-6259-779072-01
Necessary accessories
Junction box-screw terminal (Optional)
192061-02 SHC68-68-EPM shielded cable, 68-D-Type to 68 VHDCI Offset, 2 meters RMB 1,460.00
776844-01 SCB-68 anti-noise shielding I/O junction box RMB 3,480.00
NI PCI-6259 is a high-speed M-series multifunction DAQ board that can maintain high accuracy even at high sampling rates. For higher measurement accuracy, you can choose the high-precision M series equipment, which uses an 18-bit analog-to-digital converter to increase the resolution by 4 times.
The high-speed M series equipment includes some advanced features, such as NI-STC 2 system controller, NI-PGIA 2 programmable amplifier and NI-MCal calibration technology, thereby improving performance and accuracy. The onboard NI-PGIA 2 amplifier of the high-speed M-series devices is designed for fast stabilization time at high-speed scan rates, and it can ensure 16-bit accuracy even when measuring all channels at the fastest speed. To learn more about the M series technology, equipment specifications, recommended cables and accessories, please check the data sheet and specifications.
Specification summary
Overview |
product | PCI-6259 |
Product Series | Multi-function DAQ |
Bus type | PCI |
Product number | 779072-01 |
Operating system / object | Real-time system, Linux, Mac OS, Windows |
LabVIEW RT support | Yes |
DAQ product family | M series |
Measurement type | Frequency, quadrature encoder, digital, voltage |
Compliance with RoHS directive | Yes |
Analog input |
Number of channels | 32, 16 |
Single-ended channel | 32 |
Differential channel | 16 |
Resolution | 16 bits |
Sampling Rate | 1.25 MS/s |
Maximum analog input voltage | 10 V |
Maximum voltage range | -10 V-10 V |
Accuracy of the maximum voltage range | 1920 µV |
Sensitivity to the maximum voltage range | 112 µV |
Minimum voltage range | -100 mV-100 mV |
Accuracy of minimum voltage range | 52 µV |
Sensitivity of minimum voltage range | 6 µV |
Number of ranges | 7 |
Simultaneous sampling | no |
On-board storage | 4095 samples |
Analog output |
Number of channels | 4 |
Resolution | 16 bits |
Maximum analog input voltage | 10 V |
Maximum voltage range | -10 V-10 V |
Accuracy of the maximum voltage range | 2080 µV |
Minimum voltage range | -5 V-5 V |
Accuracy of minimum voltage range | 1045 µV |
Frequency Range | 2.86 MS/s |
Single channel current drive capability | 5 mA |
Digital I/O |
Two-way channel | 48 |
Input channel only | 0 |
Output channel only | 0 |
Number of channels | 0, 48 |
timing | Software, hardware |
Maximum clock rate | 10 MHz |
Logic level | TTL |
Input Current | Leakage current, source current |
Output current | Leakage current, source current |
Programmable input filter | Yes |
Support programmable power-on state? | Yes |
Single channel current drive capability | 24 mA |
Total current drive capacity | 1 A |
Watchdog timer | no |
Support handshake I/O? | no |
Support mode I/O? | Yes |
Maximum input range | 0 V-5 V |
Maximum output range | 0 V-5 V |
Counter/timer |
Number of counters/timers | 2 |
Number of DMA channels | 2 |
Buffer operation | Yes |
Short-term pulse interference cancellation | Yes |
GPS synchronization | no |
Maximum range | 0 V-5 V |
Maximum signal source frequency | 80 MHz |
Pulse generation | Yes |
Resolution | 32 bits |
Time base stability | 50 ppm |
Logic level | TTL |
Physical standards |
length | 15.5 cm |
width | 9.7 cm |
I/O connector | 68-pin VHDCI female |
Timing/triggering/synchronization |
trigger | Digital, analog |
Synchronous bus (RTSI) | Yes |
NI SCB-68 |
| - Shielded I/O junction box, suitable for 68-pin X series, M series, E series, B series, S series and R series DAQ devices
- Screw terminal can realize simple I/O connection, and can also be matched with CA-1000
- 2 general breadboard areas
- On-board cold junction temperature compensation sensor for low-cost thermocouple measurement
- For high-precision thermocouple measurement, SCC or SCXI signal conditioning can be used
|
Overview NI SCB-68 is a shielded I/O junction box that can connect I/O signals to plug-in data acquisition (DAQ) devices equipped with a 68-pin connection port. When combined with shielded cables, SCB-68 can provide a robust and extremely low-noise signal termination. It is compatible with single-connector and dual-connector NI X-series and M-series devices equipped with 68-pin connectors. The junction box is also compatible with most NI E-series, B-series, S-series, and R-series DAQ devices. |
NI SHC68-68-EPM |
| - Can connect 68-pin X-series and M-series devices to 68-pin accessories
- The length is divided into 0.5 meters, 1 meter, 2 meters, 5 meters and 10 meters
- Equipped with individually shielded analog twisted pair to reduce crosstalk of high-speed boards (crosstalk)
- Download the PDF file to get product compatibility chart, product details and ordering information
- Compliance with RoHS directive
- The best performance version of SHC68-68 shielded cable assembly
|
Overview NI SHC68-68-EPM is specially designed and may be used with NI X-series and M-series data acquisition (DAQ) devices. The cable contains: independent digital and analog parts, individually shielded twisted pair for analog input, individually shielded analog output, and twisted pair for critical digital I/O. Download the PDF specification to learn about the additional features and advantages of EPM cables in use. It has a 68-pin 0.050 series D-type connector to a 68-pin VHDCI connector, allowing you to connect M series devices to standard 68-pin accessories. Two cables are required to access the pins on M series devices with 2 connectors. SHC68-68-EPM is RoHS compliant. |