압력 스위치 개조 튜닝 세차 약뿌리기 오토바이 차 전기 부풀려지지 않음 브랜드 자동차 타이어 공기 펌프
  • 상품번호 : 1378063
    압력 스위치 개조 튜닝 세차 약뿌리기 오토바이 차 전기 부풀려지지 않음 브랜드 자동차 타이어 공기 펌프
  • 상품가격
  • 33,900
    • 제품금액
    • 33,900
    • 국제운송료
    • 6,900
    • 단일상품일 경우 통관비, 관세, 부과세가 포함된 가격에 판매되고 있으며 별도의 통관비 및 관세, 부가세를 청구하지 않습니다.
      단, 2개 이상 장바구니 담은 총 금액이 25만원 초과될 경우 관,부가세가 부과될 수 있습니다.
      (목록통관이 아닌 일반통관 상품(화장품및 식품류)일 경우 15만원 초과시)
    • 부피나 무게등이 큰 상품의 경우, 추가 배송비가 청구 될 수 있습니다.
  • 적립금
  • 339 적립금을 받으려면?
  • 색상/사이즈
  • 상품번호
  • 1378063
  • 제조사/원산지
  • OEM / 중국외 다수 국가
  • 배송국가
  •  중국배송
  • 배송기간
  • 평균 영업일기준 10~14일
  • 구매하기
  • 장바구니

꼭! 읽어주세요

상표권 및 퍼블리시티권 관련 안내.....

  • 본 상품의 이미지 또는 제목이 상표권, 이미지저작권, 초상권 등을 침해할 경우, 아래의 연락처로 연락주시면 바로 처리해 드리겠습니다.
  • 바로처리 신고센터 : 070-4070-6591, smartjikgu@hau.bz 고객센터 운영시간 : 오전 10시 ~오후 4시(점심 12시~1시), 공휴일은 휴무

배송비 및 배송기간 배송추적방법

  • 상품 2개이상 주문시 추가배송비가 발생 할 수 있으며, 추가배송비 발생시 별도로 전화를 드리겠습니다.
  • 글로벌 쇼핑 스마트직구는 해외사이트(쇼핑몰)로 부터 대신 구매를 해 드리고 있습니다.
  • 부피나 무게등이 큰 상품의 경우, 추가 배송비가 청구 될 수 있습니다.
  • 본 상품의 배송기간은 영업일 기준 약 10~14일정도이며, 공휴일 포함하시면 약 20일정도 소요됩니다.
  • 해외밴더사의 공급가격이 변경될 경우, 가격이 변동 될 수 있으며, 또한 배송상태가 "해외구매완료상태" 이면 이미 해외구매가 완료되어 주문취소가 불가 하거나 취소비용(약 20달러)가 발생할 수 있습니다.

전기용품 및 생활용품 안전관리법시행에 따른 공지

  • 본 상품은 해외 구매대행을 통하여 유통되는 상품으로 [ 전기용품 및 생활용품 안전관리법] 에 따른 안전관리 대상 제품입니다.
  • 상품제목

    번역 압력 스위치 개조 튜닝 세차 약뿌리기 오토바이 차 전기 부풀려지지 않음 브랜드 자동차 타이어 공기 펌프
    원문 压力开关改装洗车打药机车载车用电动不充气品牌汽车轮胎充气泵

    상세정보

    번역
    브랜드 : OEM
    브랜드 : OEM
    브랜드 : OEM
    원문
    品牌: OEM
    品牌: OEM

    옵션 상세 정보

    번역 GPI 공기 펌프 천파우치 설치
    원문 GPI气泵布包装
    번역 GPI 공기 펌프 툴세트 도구세트
    원문 GPI气泵工具套装





















    Brief introduction of dual-cylinder portable air pump:
    This vehicle-mounted air pump has a double cylinder inflator, a pure copper coil and a metal body, and it works by the operation of an internal motor. Principle: When the motor is running and pumping air, the valve of the communicating device is opened by the atmospheric pressure, and the gas enters the cylinder, and when the tire is pumped, the valve is closed by the air pressure in the cylinder, and the gas enters the tire, which is considered to be used. The principle of atmospheric pressure is the same as inflating cars, rubber balls, and rubber boats. Material of car air pump: metal.
    Advantages of dual-cylinder portable air pump:
    1. Ultra-small vibration and noise(powerful)
    2. Anti-vibration rubber feet are firm and strong
    3. The range is (0-100) PSI pressure gauge(Higher accuracy)
    5. Small size and beautiful appearance.
    6. Faster pumping speed 1-2 minutes, a completely flat tire can be filled.
    7. Shock-absorbing feet make the use more stable.
    How to use the dual-cylinder portable air pump:
    Take out the cigarette lighter plug, plug it directly into the car cigarette lighter, turn on the air pump switch, and after the air pump starts, insert the air nozzle at the top of the inflation hose directly into the tire valve. When you hear the sound of air leaking from the tire, it means The air has circulated, and the air nozzle can be tightened to inflate. At this time, the air will no longer leak out. When inflating, the gauge pointer rises with the tire saturation, when the pointer reaches the appropriate tire pressure(The tire pressure of general car tires is 223kpa=35PSI), Take out the plug and the gas nozzle, and the work is completed. Please use the professional ball needle and nozzle of this machine to connect with the air nozzle to inflate the ball and other air-demanding equipment.
    Precautions for dual-cylinder portable air pump:
    1. When using, please start the car engine first to increase the power without consuming the car battery power.
    2. This machine is limited to DC(DC12V10A)Power supply, do not use household high-voltage power supply.
    3. When inflating, please cool down and rest for 10 minutes of continuous work to extend the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes.
    4. When the general tire is inflated, it can reach the normal tire pressure of 220KPA in about 1-2 minutes. Big tires will take a little longer. If the indicator pointer rises rapidly when starting to inflate, it means that air is being filled into the tire, and it must be stopped and operated again, otherwise, the instrument and the motor will be damaged.
    5. This type of vehicle-mounted portable air pump can generally only be used in small cars, and buses and large trucks cannot be used to prevent insufficient pressure and cause danger.
    6. At the same time, be sure to pull the car to brake before use, and block the wheel to prevent it from sliding; and because of its high transmission pressure, the user should avoid over-inflation and explosion of the tire, as long as the number on the barometer reaches the recommended charge The air pressure value is sufficient. The air pump should be placed in a dry place, not in contact with rain, snow and other liquids to prevent electric shock.
     
    GWJ oil-free silent air pump air compressor
    GWJOil-free silent air pump air compressor
    (The motor has a copper core coil, which is not silent, and the sound is very small compared with ordinary)

     model Power (w) Speed ??(r/min) Pressure (bar) Nominal volume flow (l/min) Total Weight(kg)
     gwj 550w 550w 1380 7.0 100 21
     gwj 780w 780w 1380 7.0 165 25
     gwj 1100w 1100w 1380 7.0 200 42
    Oil-free silent air compressors are widely used in the fields of dentistry, breeding, food, medicine, fitness, cosmetology, chemical industry, scientific experiment, etc. because they can provide oil-contaminated, pure and environmentally-friendly air source. They can also be used as vacuum pumps.
    GWJThe main advantages of oil-free silent air pump air compressor are as follows:
    1. The motor adopts advanced design system for optimized design to ensure that the compressor achieves high power, high efficiency, low energy consumption, high performance and high reliability.
    2. The piston ring is designed with a new environmentally friendly material, with a small friction coefficient and self-lubricating. It replaces the history of traditional piston engine oil lubrication. More importantly, it will not produce harmful gases containing any oil and cause no secondary damage to the gas source. Pollution.
    3. The cylinder liner adopts advanced surface hardening technology to reduce thickness and accelerate heat transfer; effectively improve the surface density and wear resistance, and reduce the coefficient of friction. Thereby prolonging the service life, reducing maintenance time and costs.
    4. The intake and exhaust valve discs are made of Swedish valve steel belt after more than 80 hours of precision rolling treatment. With a reasonable noise reduction design, the volumetric efficiency is improved and the noise is significantly lower than other similar products.
    5. Multiple pressure and overload protection to ensure smooth and reliable operation of the machine.
    6. The design of the whole machine is thoughtful and thoughtful, flexible to move, simple to operate, and convenient to maintain
    Buyers note: The machine head will get hot after running for a certain period of time. This is a normal phenomenon. It is the same as the exhaust pipe of a motorcycle. It dissipates heat. If there are children in the house, please pay attention and touch it by hand. Thank you! !

     


     

     

    Related Information
    Welcome to consult
    ...alked! How I ran
    sometimes! How I looked forward to catch the first view of the
    well-known woods! With what feelings I welcomed single trees I
    knew, and familiar glimpses of meadow and hill between them!

    Charlotte Bront. ElecBook Classics


    Jane Eyre 602

    At last the woods rose; the rookery clustered dark; a loud
    cawing broke the morning stillness. Strange delight inspired me:
    on I hastened. Another field crossed―a lane threaded―and there
    were the courtyard walls―the back offices: the house itself, the
    rookery still hid.“My first view of it shall be in front,” I
    determined,“where its bold battlements will strike the eye nobly
    at once, and where I can single out my master’s very window:
    perhaps he will be standing at it―he rises early: perhaps he is now
    walking in the orchard, or on the pavement in front. Could I but
    see him!―but a moment! Surely, in that case, I should not be so
    mad as to run to him? I cannot tell―I am not certain. And if I
    did―what then? God bless him! What then? Who would be hurt
    by my once more tasting the life his glance can give me? I rave:
    perhaps at this moment he is watching the sun rise over the
    Pyrenees, or on the tideless sea of the south.”

    I had coasted along the lower wall of the orchard―turned its
    angle: there was a gate just there, opening into the meadow,
    between two stone pillars crowned by stone balls. From behind
    one pillar I could peep round quietly at the full front of the
    mansion. I advanced my head with precaution, desirous to
    ascertain if any bedroom window-blinds were yet drawn up:
    battlements, windows, long front―all from this sheltered station
    were at my command.

    The crows sailing overhead perhaps watched me while I took
    this survey. I wonder what they thought. They must have
    considered I was very careful and timid at first, and that gradually
    I grew very bold and reckless. A peep, and then a long stare; and
    then a departure from my niche and a straying out into the
    meadow; and a sudden stop full in front of the great mansion, and

    Charlotte Bront. ElecBook Classics


    Jane Eyre 603

    a protracted, hardy gaze towards it.“What affectation of diffidence
    was this at first?” they might have demanded;“what stupid
    regardlessness now?”

    Hear an illustration, reader.

    A lover finds his mistress asleep on a mossy bank; he wishes to
    catch a glimpse of her fair face without waking her. He steals softly
    over the grass, careful to make no sound; he pauses―fancying she
    has stirred: he withdraws: not for worlds would he be seen. All is
    still: he again advances: he bends above her; a light veil rests on
    her features: he lifts it, bends lower; now his eyes anticipate the
    vision of beauty―warm, and blooming, and lovely, in rest. How
    hurried was their first glance! But how they fix! How he starts!
    How he suddenly and vehemently clasps in both arms the form he
    dared not, a moment since, touch with his finger! How he calls
    aloud a name, and drops his burden, and gazes on it wildly! He
    thus grasps and cries, and gazes, because he no longer fears to
    waken by any sound he can utter―by any movement he can make.
    He thought his love slept sweetly: he finds she is stone dead.

    I looked with timorous joy towards a stately house: I saw a
    blackened ruin.

    No need to cower behind a gate-post, indeed!―to peep up at
    chamber lattices, fearing life was astir behind them! No need to
    listen for doors opening―to fancy steps on the pavement or the
    gravel-walk! The lawn, the grounds were trodden and waste: the
    portal yawned void. The front was, as I had once seen it in a
    dream, but a well-like wall, very high and very fragile-looking,
    perforated with paneless windows: no roof, no battlements, no
    chimneys―all had crashed in.

    And there was the silence of death about it: the solitude of a

    Charlotte Bront. ElecBook Classics


    Jane Eyre 604

    lonesome wild. No wonder that letters addressed to people here
    had never received an answer: as well despatch epistles to a vault
    in a church aisle. The grim blackness of the stones told by what
    fate the Hall had fallen―by conflagration: but how kindled? What
    story belonged to this disaster? What loss, besides mortar and
    marble and wood-work had followed upon it? Had life been
    wrecked as well as property? If so, whose? Dreadful question:
    there was no one here to answer it―not even dumb sign, mute
    toke... my country''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s economy will maintain steady and rapid growth, and energy demand will continue to increase. By 2020, at least 3 billion tons of standard coal may be needed.”Although the total amount of coal resources is so large, Hong Shaohe is not optimistic at all, because“The per capita recoverable reserves are only about half of the world average. The rational development and utilization of coal resources is an arduous task facing the coal industry”.
    The reality is that the overall energy utilization efficiency of the coal industry is low, about 28%, which is 4 percentage points lower than the national energy utilization rate and more than 10 percentage points lower than that of developed countries. Therefore, the coal industry is related to steel, non-ferrous metals, electric power, petrochemicals, etc. The industry has been listed as the 9 major energy-consuming industries by relevant departments.
     “Regardless of whether it is from the world''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s energy supply pattern or from the needs of my country''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s economic development, energy conservation in the coal industry is related to energy security and the sustained and stable development of the national economy and society.”Hong Shaohe said.
    This is the direct reason for the launch of the "Opinions" discussion draft.
    The difficulties are great, the potential is great
    The coal industry’s energy-saving goal formulated in the "Opinions" discussion draft is to“”At the end of the period, the comprehensive energy consumption of the added value of my country''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s coal industry decreased by 22% compared with 2005. The comprehensive utilization rate of coal gangue and coal slime and other solid wastes, mine gas drainage utilization rate, washing proportion, and mine water utilization rate reached 70%, respectively. 60%, 50% and 70%.
    Relevant data show that the current comprehensive utilization rate of coal gangue and coal slime and other solid wastes, mine gas drainage utilization rate, proportion of incoming washing, and mine water utilization rate are about 50%, 20%, 33% and mine water respectively. 30%-40%.
     “To achieve these goals is difficult and the task is heavy.”Hong Shaohe said,“However, we must realize that this goal was put forward on the basis of full investigation and research, and there is still great potential for energy conservation in my country''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s coal industry.”
    According to statistics, the energy consumption of my country''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s coal industry last year reached more than 85 million tons of standard coal, accounting for 5.48% of the coal output that year. With the addition of washing losses, the industry''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s own energy consumption was equivalent to nearly 180 million tons of commercial coal consumption. At the same time, the average recovery rate of coal resources in my country is low. The recovery rate of small coal mines, which accounts for about 38% of the national coal output, is only 10%-15%.
    Another problem is the low average production efficiency. Last year, my country’s coal mines employed about 5.5 million people, and the per capita output was less than 400 tons, which were 1/24 and 1/20 of Australia’s. At present, the average efficiency of main ventilators, main drainage pumps and industrial boilers in key state-owned coal mines is about 15-20% lower.
    This is true for key state-owned coal mines, not to mention other small coal mines with outdated technical conditions.
    Hong Shaohe believes that my country''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s coalbed methane development is in its infancy, the low-calorific value resources are underutilized, and the production efficiency is low. This shows that the coal industry has great potential for energy conservation.
    Long-term planning and short-term arrangements are impossible
    “Energy conservation in the coal industry requires the attention of government departments. We are also actively doing work in this area, hoping to promote the introduction of relevant policies.”Hong Shaohe said.
    Hong Shaohe''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s statement is related to the status of industry associations. Because the discussion draft of the "Opinions" is just a copy“instructions”, Does not constitute a coercive force on coal companies; moreover, industry associations are in parallel with power, and there is no practical means to ensure the realization of energy-saving goals.
     “Some energy-saving technologies are not complicated, but why are they popularized? One of the main reasons is the lack of relevant incentives and punishment mechanisms.”Hong Shaohe said.
    For example, Hong Shaohe said that the entry rate has been hovering around 33% for a long time, while the developed entry rate is generally above 90%.“The average coal ash content is about 28%. With so much ash content running across the country, how much capacity is wasted? When it is used, it also reduces the utilization efficiency and increases pollution.”
    Data show that 60%-70% of sulfur and carbon compound pollution comes from burning coal. If these burning coals are washed, the above-mentioned pollution can be reduced by half, because the ash content of metallurgical coal can be reduced to less than 10% after washing. Ash content can be reduced to 15%-16%.
    Hong Shaohe believes that the main reason for the above situation is that companies do not consider long-term development driven by short-term interests and do not pay attention to the adoption of energy-saving technologies.
    “In this regard, there must be both long-term planning and short-term arrangements. There is a lot of work that needs to be done by the government.”Hong Shaohe revealed that relevant departments are studying and formulating the "Coal Industry Development Policy" and the "Access Conditions for Coal Mine Startup".“It is hoped that these policies can be introduced soon, which can encourage the coal industry to increase investment in science and technology and promote energy-saving technologies.”
    my country''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s technology imports in the first three quarters amounted to 17.9 billion U.S. dollars
    According to new statistics from the Ministry of Commerce, in the first three quarters, a total of 8,112 technology introduction contracts were registered nationwide, with a total contract value of US$17.95 billion, a year-on-year increase of 45.2%; of which technical expenses were US$11.55 billion, accounting for 64.3% of the total contract value. Technology introduction continued to maintain a substantial increase.
    In the first three quarters, the transaction volume of proprietary technology licensing contracts was US$5.58 billion, a year-on-year increase of 57.5%, accounting for 31.1% of the total contract value. The contract value of technical consultation, technical service and joint venture and cooperative production with technology introduction content was US$4.05 billion and US$3.72 billion respectively, accounting for 22.5% and 20.7% of the amount of technology introduction, ranking second and third respectively.
    The amount of technology imported by foreign-funded enterprises was US$8.69 billion, a year-on-year increase of 49.0%, accounting for 48.4% of the total national technology import. The total amount of technology imported by state-owned enterprises was US$8.04 billion, a year-on-year increase of 55.4%, accounting for 44.8% of the total national technology import.
    The railway transportation industry has registered a total of 3.98 billion US dollars in technology import contracts, accounting for 22.2% of the total industry technology import contracts. The railway transportation industry is still a large-scale and fast-growing industry in my country. The technology introduction of the electronic and communication equipment manufacturing industry continued to maintain rapid growth. The industry introduced a total of 1,186 technologies with a contract value of US$3.49 billion, a year-on-year increase of 123.7% and accounting for 19.5% of the total industry technology introduction contracts.

    Overheating of coal chemical industry planning in some areas of China
    The National Development and Reform Commission recently concluded its investigation of coal chemical industry in Shanxi, Shaanxi, Inner Mongolia and other provinces. The survey found that although the structural adjustment of the coke and calcium carbide industries has achieved initial results, there is still serious overcapacity, and there are some areas.“Planning for overheating”The research team recommends that the "Coal Chemical Industry Policy" be released as soon as possible, and to increase support for independent intellectual property technology.
    The survey found that in the recent period, high oil prices in the international market have stimulated the coal-rich areas to develop the coal chemical industry. There are currently 30 coal chemical projects under construction, with a total investment of more than 80 billion yuan. The new production capacity is 8.5 million tons of methanol, 900,000 tons of dimethyl ether, 1 million tons of olefins, and 1.24 million tons of coal-to-liquid. The registered production capacity of methanol projects is 34 million tons, olefins 3 million tons, and coal-to-liquid 3 million tons. Some regions ignore the blindness of technology, market, resources, ecology, environment, etc.

고객님들의 최신 리얼구매후기 상품후기 더보기 >>

  • No
  • 제목
  • 고객명
  • 작성일
  • 등록된 글이없습니다..

구매대행이란?

  • 해외구매대행은 국내가 아닌 해외사이트(쇼핑몰)로 부터 대신 구매해드리고, 일정의 수수료를 받는 중간 연결업자로 구매대행의 역할은 현지 사이트로 부터 결제/통관업무/배송까지 대신 진행 해 드리는 업체입니다.
  • 구매대행은 고객님이 스마트직구에서 품목/색상 등을 확인하시고 결제할 경우, 당일에 스마트직구가 해외 해당사이트에 주문을 하는 방식입니다.
  • 교환 및 반품등 필요한 경우가 발생시 저희 스마트직구에 연락을 주시면 적극적으로 협조해 드리고 있으며, 파손 및 교환은 아래의 공지사항을 참조하시기 바랍니다.

배송기간

  • 해외배송은 해외직배송으로 10~14일(공휴일제외) 정도 소요됩니다.
  • 해외(중국 외)에서 구입할 경우, 국내와 달리 이동거리가 멀기때문에 국내와 다르게 배송기간이 결제일 기준 평균 10~14일 정도 소요됩니다.(현지사정/통관 등에 따라 배송이 지연될 수 있습니다)
  • 해외 물류창고로 배송된 후 다시 국내로 발송 시 1~3일정도 소요됩니다.
  • 해외밴더사의 사정에 따라 28일 이상 소요될 수 있으며 이 경우, 미리 연락을 드린 후 구매진행 됩니다.

통관절차

  • 단일상품일 경우 통관비, 관세, 부과세가 포함된 가격에 판매되고 있으며 별도의 통관비 및 관세, 부가세를 청구하지 않습니다. 
  • 단, 2개 이상 장바구니 담은 총 금액이 15만원 초과될 경우 관,부가세가 부과될 수 있습니다.
  • 향수의 경우 60ml 또는 2온스(oz) 이상일경우 관,부가세가 추가적으로 부과됩니다.
  • 개인통관: 판매를 목적으로 하지 아니하고 개인이 사용하기 위하여 반입하는 기자재 경우, 모델당 1개까지 가능
  • 2018년 7월 1일부터 관세청 고지사항으로 구매금액에 상관없이 개인통관고유부호 입력이 의무사항입니다.
    (미입력시 통관이 진행되지 않아 제품수령이 지연될수 있습니다.)
  • 주문시 작성하는 개인통관고유부호는 세관 통과 시 사용되며, 그 어떠한 경우에도 사용되지 않습니다.!!

취소/반품

  • 반품비용의 책정(유료반품인 경우)
  • 해외구매대행 상품은 당사가 재고를 보유하지 않으므로 교환서비스 대신 구매 취소나 환불 후 재구매를 하실 수 있습니다.
  • 상품의 배송상태가 해외구매 진행중, 해외구매완료, 해외배송중, 출고대기상태일 경우에는 오더 건당 중국내 왕복 운송료만큼 반품비용(약 20달러)이 부과됩니다.
  • 국내에서 반품을 하실경우, 무게에 따른 국내 우체국 EMS비용 + 중국내 반품비용이 부과됩니다.
    중국내 반품비용 : 쉬핑비 + 중국내 반품수수료 + 반품 쉬핑비 + 구매수수료(약 5~7만원정도 소요)
  • 반품상품이 여러개인데 주문했던 해외 구매사이트나 셀러가 상품마다 다를경우 각각 상품별로 반품비용이 발생합니다.
  • 국내 우체국 EMS 비용(단위:kg/원)
    0.5 1 1.5 2
    26,500 33,500 40,500 47,500
    3 4 5
    61,000 74,500 88,000

  • 반품이 가능한 경우(무상)
  • 배송이 완료된 상품은 7일 이내에 아래 표기된 사유에 한하여 반품 및 환불이 가능합니다.
  • 수령하신 상품이 파손/유실된경우
  • 초기 작동불량인 상품인 경우(고객임의 작동 미숙일 경우 국내왕복 택배비 입금 후 반송해 드립니다.)
  • 주문한것과 다른 상품이 배송된 경우(단, 해당 해외사이트의 홈페이지 이미지가 변경된경우 제외)
  • 위 반품사유에 해당하는 경우 상품회수 및 검수 후 환불 또는 승인취소 처리가 진행됩니다.
  • 이 경우에도 상품가격 이외의 무통장입금 수수료 및 카드수수료, 할인 쿠폰 등은 반환해 드리지 못함을 양지부탁드립니다.

  • 반품이 불가능한 경우
  • 1. 상품 수령 후 7일이 경과한 경우
  • 2. 고객님의 부주의로 상품이 파손된 경우
  • 3. 제품을 사용한 흔적이 있는 경우
  • 4. 상품을 세탁했거나, 상품에서 세탁 후 발견되는 하자나 이염이 보일경우
  • 5. 상품의 택(tag)을 제거했거나, 상품의 폴리백이 분실된 경우
  • 6. 제품박스(케이스)가 심하게 손상되어 있거나 박스(케이스)나 내용물 일부가 분실된 경우, 제품박스(케이스)에 택배송장을 붙이신 경우

A/S & 원산지표기 & 사용전원

  • 상품 수령 후 7일 이후에는 A/S 교환, 환불이 불가능합니다.
  • 제품 교환 및 A/S로 해외 반출 후 국내 반입 시 관세 및 부가세가 발생할 수 있으며, 이 경우 고객님께서 비용을 부담하셔야 합니다.
    (위의 단순변심 취소 반품 비용 참조)
  • 당사에서 직접 수입하여 판매하지 않기 때문에 원산지를 명확하게 표기하기 어렵습니다.
  • 원산지 표기는 해외(중국 외) 내수용이지만 제조는 중국/타이완 등에서 제작된 경우가 많습니다.
  • 전자기기일 경우, 해외에서는 110v를 사용하는 경우가 많습니다.(일부 110v/220v)

기타 자주하는 질문

  • 국내 제품이 아니기 때문에 한글설명서가 없습니다.
  • 당사는 해외 유명 쇼핑몰등에서 직접 구입합니다. 시계의 경우 보증서등이 미포함 일 수 있습니다.
  • 구매당시 재고가 있어 주문했지만 해당 판매점에서 제품이 없을 경우 주문이 취소될 수 있습니다.
  • 환율이 급등하거나 해외밴더사의 공급가격이 변경될 경우 가격이 변동될 수 있으니 이점 양해드립니다.

프리미엄상품평 상품평은 주관적인 의견이므로 보는 사람에 따라 차이가 있을 수 있습니다. 성격에 맞지 않는 글은 삭제될 수 있습니다. 글쓰기

  • No
  • 제목
  • 고객명
  • 작성일
  • 등록된 글이없습니다..

일반상품평 상품평은 주관적인 의견이므로 보는 사람에 따라 차이가 있을 수 있습니다. 성격에 맞지 않는 글은 삭제될 수 있습니다.

  • No
  • 제목
  • 고객명
  • 작성일
  • 등록된 글이없습니다..

Q&A 상품관련 문의를 남겨주시면 답변해드립니다. 성격에 맞지않는 글은 삭제될 수 있습니다.

  • 제목
  • 내용
  • No
  • 제목
  • 고객명
  • 작성일
  • 등록된 글이없습니다..

Brand

  • 무통장입금 계좌이체
  • 국민은행 798801-01-169826
    NH 농협 607-01-117047
  • 예금주 : (주) 하우

Customer Center

070. 4070. 6591

평일 Am. 10:00 ~ Pm. 04:00
점심 Pm. 12:00 ~ Pm. 01:00
상담시간 이후에는 1:1게시판을 이용해 주세요.

  • 광주광역시 동구 금남로 245, 전일빌딩 6층 618호(금남로1가) | 회사명 : (주)하우 | 대표자명 : 손민석 | 사업자등록번호 : 410-81-87765 | 통신판매업신고 제2020-광주동구-0187호 개인정보 보호 관리자 : 손민석 | 문의 전화 : 070-4070-6591 I Fax 062-443-0595 | E-mail: howglobalshopping@hau.bz 반송처 및 물류센터 주소 : 광주광역시 동구 금남로 245 (전일빌딩) 618호
  • Copyright ⓒ2024 하우글로벌쇼핑 All rights reserved.
  • 스마트직구는 경매대행, 구매대행 등의 입찰, 구매를 중계하고 국제배송을 대행하는 서비스를 제공하며, 상품의 이미지 및 등록내용, 진품여부 등에 대해서는 일체의 책임을 지지 않습니다.
    스마트직구는 관세법 등 관련규정을 준수하고 불법물품을 취급하지 않으며, 분할배송에 의한 가격허위신고등 구매자의 불법사항 요청에 대해 일체 협조하지 않습니다.