Introduction to Bluetooth JQ-D106BT Audio Decoder Board
*Audio decoder board supports format description:
Support U disk and SD card to play a variety of format decoding (MP3/WAV/APE/FLAC), channel / mono ~ stereo;
*MP3: Sampling rate/8~48K. Code rate/8~448Kbps, bit width/16bits;
*WAV: sampling rate/8~48K, format/WAV ima/Microsoft ADPCM/WAV PCM, bit width/16bits;
*FLAC: sampling rate/8~48K, bit width/16bits;
*APE: FAST/NORMAL encoding, bit width/16bits.
Support APE FLAC WAV WMA MP3 format audio files((Select folder is not supported)
The location of the memory when the power is off: volume memory/U disk or TF card playing track memory,
Support U disk or TF card (64g)
* Cannot use AC AC transformer, such as AC transformer must be rectified/filtered/stabilized and then pure DC voltage can be used.
*This board does not have a power amplifier! *Cannot connect speakers or speakers directly! *Need to connect to the power amplifier board or power amplifier and then connect to the speaker to use!Power supply: use DC power supply within DC7V-12V!
If using 12V or 24V battery/battery and power supply exceeding DC12V (must choose package with step-down module)!
Overall dimensions: width 75mm* height 50mm* depth 24mm
Installation opening: width 64mm * height 40mm(Note: Do not remove the position of the mounting screws at the four corners)
Installation hole distance: 62mm wide*38mm high
*Key operation instructions
1. Previous song key: short press the previous song; long press the volume to decrease;
2. Play/Pause button: short press to pause or play, short press in the radio FM state to automatically search for channels;
3. Next song key: short press a song; long press the volume to increase;
4. Mode switch key: USB/TF/FM/BLUL switch,
*FM radio description:
1. Press the mode button to switch to the FM position, short press play/pause to automatically search for channels in the radio FM state, and automatically play a holiday after the automatic search is completed;
2. Note * FM radio must be in an open environment and there are no high-rise buildings around. This decoder board is compatible with FM radio. FM radio may not work well or receive FM programs. If it must be a user who needs FM radio programs, Please do not buy!
*Instructions for Bluetooth pairing and connection:
1*Press the mode button to switch to the BLUL position, open the phone settings and find the Bluetooth option, search for the Bluetooth device, search for the Bluetooth name JQ-BT and connect and pair, after the pairing is successful, click on the phone player to play;
*Bluetooth call description:
1*The Bluetooth hands-free call can only be realized when the mobile phone is connected to the decoder board in the Bluetooth state or the mobile phone Bluetooth is playing music. (Note * In the USB/TF/FM state, Bluetooth calls are not supported!)
2*Call description: (Only D088BT call version has the call function) When the phone is playing music through Bluetooth, if there is an incoming call(Toot...toot)Press play to connect the call, press play again after the call to stop, and the music will automatically play after the call. Call back: Continuously short press the play button in the Bluetooth state to call back the last call number. Caller ID (Chinese).