DC stabilization power supply for ships
SY-8040-II type
user''s manual
In the purchase of the company''s product, we will fulfill our intention to serve you. The power supply of the company has the following characteristics:(You can customize it with the customer)
★ With output voltage and current dynamic display;
★ High -precision stabilization, the output DC stabilization coefficient is less than 1%;
★ The output has an automatic and overcurrent automatic protection, and the overheating fan cools;
★ Use the voltage range wide;
★ The input AC voltage is too low, or it will automatically switch to the battery power immediately when the power outages to ensure that the communication is smooth.
Note: If the content in this description has changed, it will not be notified separately.
model | Referred to | Input voltage | The output voltage | The most High Current | Continuous current | Scope of application |
| | | | | | Middle and high frequency, thunder Da, unilateral band, Guide Guide, High frequency Equal high power Equipment. |
| | |
8040 | AC40ADual output | Communication 220V /DC 24V | DC 24V | 40A | 15A |
DC 13.8V | 18A |
Precautions:
With any power supply, according to the instrument you use, what voltage output required by the professionals configure, and the power supply within the output power range. If the configuration is improper, it may cause damage to the instrument or burn the power!
Preparation before use:
1. The power supply is placed in dry and horizontal, and can be fixed with a stand.
2. Check whether the switch is closed before power -on. After confirmation, the AC power plug is inserted on the AC 220V socket. The red and black wiring column entered in the front panel of the 8042 power supply can connect the positive and negative bipolar on the battery. Pay attention not to the positive and negatives.
3. The red and black wiring column output at the front panel can connect the navigation equipment. Pay attention not to the backward.
4. After preparing, turn on the power switch so that the device can be used normally.
Use after power -on:
After the 8040 dual output power supply is turned on, the corresponding value is displayed on the digital tube.
Scope of maintenance and warranty
Do not put the power in a corrosive environment when using it to avoid damaging electronic components. When moving the power, try to be careful as much as possible to avoid loosening the internal line contact after severe vibration.
The warranty period of this product is 1 year. During the warranty period, the failure caused by the normal use of the instruction manual(Judged by the company''s personnel)For free repair. If other circumstances are damaged, it is used as a charging repair.
Template protection code 0528