The FILCO key puller ushered in the second generation of products. Compared with the first and second generations, it has an intuitive change. For example, it is made more refined, and the FILCO logo is engraved on the handle. At the same time, the steel wire is further made to accommodate 3 A keycap, it is more convenient to pull the keycap! The wire keyer is one of the key pullers currently in use, with which you can easily pull out the longer keys: left and right Shift, one-character carriage return, and three soft keys in the number area, etc.! Reminder: If the keycap is tight when you pull it up, don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t pull it up vigorously at this time(There is a danger of pulling out the shaft), The correct is to slowly pull up when you pull up with a little force and swing from side to side. Diagram of using key puller:
Use without steel plate(The shaft is not embedded in the steel plate)Attention users of mechanical keyboards Because the shaft is directly welded to the circuit board, the main body of the shaft is exposed. The red circled part in the picture can be hooked by the steel wire, and the red circled part with steel plate is directly attached to the steel plate, making it impossible to pull the wire. Hook the shaft body firmly to prevent the shaft from being pulled out and causing damage to the mechanical keyboard! (If you are using a mechanical keyboard without steel plate, be sure to check whether it is hooked on the keycaps when using) The current mechanical keyboards without steel plates are: CHERRY G80-3*** full range, POKER 40% full range |