1. All metal, all metal, all metal,(Non-PCB cover)Aluminum alloy gun color oxidation shell
2. Shell size 56*47*21mm
3. Input DC interface 5525(Note: external DC power supply is required)
4. Enter the PD default to apply for the highest voltage(12-20V)
5. DC/PD at the input cannot be input at the same time
6. A1+C1 or A2+C2 simultaneously output 5V5A
7. C1&C2 port uses PD, the input must be greater than the output voltage(Step-down circuit)
8. Dual independent 4-port output, which can support fast charging of two devices at different voltages at the same time
9. The conversion rate is about 96%, low fever, and can be used for a long time with high power
10. Enhanced heat dissipation MOS tube The main heating element has a heat sink
The input supports 12-28V wide voltage,
USB-C port single port supports up to 100W, USB-A port single port supports up to 60W
Maximum simultaneous support of 200W output
USB C1 &C2: 5V/3A 9V/3A 12V/3A 15V/3A 20V/5A& nbsp;PPS 5A(MAX 100w)
Support protocol: PD3.0/PPS/QC4.0+/FCP/SCP/AFC/PE/APPLE 2.4A
USB A1&A2: 5V/5A(SCP) 9V/3A 12V/3A 20V/3A(MAX 60W)
Support protocol: QC/VOOC/DASH/FCP/SCP/AFC/PE/APPLE 2.4A
SW3518S is a VOOC authorized version, supports Huawei SCP; OPPO VOOC; OnePlus DASH WARP mobile phone low voltage fast chargeCustomized version of PPS 5A protocolSupport Samsung, Black Shark, Xiaomi and other fast charging
Consultation and discussion exchange group: 744516409