RB-150CS is a metal-tooth high-torque 360-degree continuous rotation robot servo steering gear launched by Aosong Robotics. It can be installed with matching wheels to achieve the effect of stepping motor. The internal motor is a DC brushless motor and an iron-free rotor. It has the advantages of high energy conversion efficiency, fast response speed of activation brake, reliable operation, strong adaptive ability, and less electromagnetic interference. Compared with iron core motors of the same power, it has the advantages of small size and light weight; steering gear feedback potentiometer Using conductive plastic potentiometer, its accuracy and wear resistance are much better than wire-rao potentiometer; motor control integrated circuit (IC) uses digital chip and power switch to form H-bridge circuit, voltage control bipolar drive mode has faster response speed , Small non-reaction zone, high positioning accuracy, strong anti-interference ability and good compatibility, etc., suitable for a wide range of applications in the field of robots and aircraft models. High energy conversion efficiency, fast response speed of activated braking, reliable operation, strong adaptive ability, and less electromagnetic interference RB-150CS Servo servo Small size and light weight compared with iron core motors of the same power RB-150CS Servo servo Metal tooth high torque 360 ??degree continuous rotation robot servo steering gear Tiled graph
1. Product name: RB-150CS steering gear (360 degree continuous rotation)
2. Product Code: RB-04M009
3. Working voltage: DC 4.8V~7.2V
4. Control mode: positive pulse stops at 1500us
5. Working frequency: 50Hz
6. Working pulse width: 500~2500us
7. Dead zone setting: 10us
8. No load speed: 0.16 seconds/60 degrees (4.8V); 0.14 seconds/60 degrees (6V); 0.12 seconds/60 degrees (7.2V)
9. Torque size: 13Kg·cm(4.8V) 15KG·cm(6V) 16KG·cm(7.2V)
10. Production process: coreless motor + metal gear + ball bearing
11. Working temperature: 0℃-60℃
12. Weight: 56g
13. Cable length: 300mm
14. Product size: 40.8mm X 20.1mm X 38mm
15. Wiring mode: red(just)Brown(burden)yellow(Signal)
16. Accessory package: round rudder disc, flat rudder angle, cross rudder angle, podium rudder angle, fastening screws,
Anti-vibration rubber pad, copper sleeve, rudder disc fixed self-tapping nail
17. Packing method: sealed in waterproof bag