1.NiMH batteriesIt is a battery with high environmental protection at present. It no longer uses toxic cadmium and can eliminate the pollution problem caused by heavy metal elements to the environment. Ni-MH batteries have a large energy density ratio, which means that the use of Ni-MH batteries can effectively extend the working time of the equipment without adding extra weight to the digital equipment. Another advantage of nickel-hydrogen batteries is: greatly reducing the memory effect existing in nickel-cadmium batteries, which makes nickel-hydrogen batteries more convenient to use.This battery can be used for 2WD mobile robot platforms, RP5 crawler vehicles, digital products, etc., 2300mAh is sufficient to make your robot full of power.
2.Almighty 2-10 series Ni-MH Ni-Cd battery pack smart chargerMultiple intelligent judgments, multiple security protections! Real 2-10 series automatic identification, open universal interface board!
3.Delipow chargerAdopting variable voltage power technology, outstanding performance, 30% increase in charging efficiency, unique 9v charging socket, 9V rechargeable battery suitable for electric and wireless products, AA(Number five)/AAA(Number seven)Ni-MH battery model is dual-purpose, single-charge detection, 1 battery can also be charged, with LED light charging indicator charging status, red double lights are always on when charging.
4.PISEN 9V250mAh Ni-MH rechargeable batteryIt can be used as the power supply battery for the control part of the 32-way steering gear controller and the power supply battery for the Arduino controller. It is light in weight and small in size. It is connected with the 9V battery button, plug and play, which is very convenient.
(RB-10P010)Full capacity 2300mAh Ni-MH rechargeable battery No. 5 AA power battery Ni-MH RP5 dedicated
(RB-10P015)Delipow 9V battery charger Ni-MH battery charger rechargeable battery
(RB-10P005)Ni-MH/Ni-Cd HM battery packMultiple intelligent judgments, multiple safety protections!
1.Ni-MH rechargeable battery
Full capacity 2300mAh
2.2-10 series Ni-MH Ni-Cd battery pack
3. Delipu 9V battery charger Ni-MH battery charger
1. Product name: Delipow charger
2. Product Code: RB-10P015
3. Input: AC220V 50/60Hz
4. Output: 1.2V---100-120mAAA/AAA
5. Executive standard: GB/T22084.2-2008
6. Calculation formula of charging time charging time = battery capacity x1.25/charging current
4.9V250mAh Ni-MH rechargeable battery
2-10 series Ni-MH Ni-Cd battery pack
1. Plug the charger power supply into a 110V or 220V power supply and turn on the power supply.
2. After the power is turned on, when the battery is not connected, the charger indicator light is green; when the battery is connected, the charger detects the battery, and the indicator light turns from green to red after 0.5 seconds, indicating that it is charging.
3. After the battery is fully charged, the charger indicator turns green and enters trickle charging. If the power is not unplugged, the charger will fully charge the battery, but will not cause overcharge.
4. Flashing red light: indicates that the current battery pack is faulty, the internal resistance of the battery is high or aging, the battery pack is connected reversely, the battery is in poor contact, the internal resistance of the charging circuit is large, the charger stops charging and enters the protection program, and the red indicator light flashes. Remind the user to repair in time to avoid other damage; when the charger output terminal is short-circuited, the charger red light flashes.
5. The charger must not have diodes or resistors in the charging circuit, and there must be no parallel connection of battery packs, otherwise the charger will not be able to detect the battery status, which will result in the charger not charging the battery or overcharging or not being fully charged. In other words, the charger can only be directly connected to the battery pack for charging, and can only charge one set of battery packs within a period of time, and cannot charge two or more battery packs in parallel at the same time.