From now on, buy any CPU in our store to give free silicon grease for free.Please join the shopping cart with the CPU you want, do not shoot or send it, wait for the owner to modify the price before paying!
Silicon grease connection address:
I want to be more ideal, please purchase a letter 7783 thermally conductive silicone. Connection address:
http://item.taobao.com/item.htm?id=13214790407
Cool cold tong liquid metal connection address:
Before installing the CPU:
1. Remove the original CPU, clean up the dust on the fan and heat sink, clean the residual silicone on the heat sink, especially the hard silicone fat must bethoroughClean it clean, thisVery important!
2. Insert the newly purchased CPU according to the correct direction, and apply a thin layer of silicone on the top of the CPU. Don''''''''t apply too much, just able to fill the most ideal in the top of the CPU and the heat sink.(Take the small branch silicone in needle tube as an example, the silicone of 2-3 small grid is appropriate.)
3, put the heat sink, first press the finger to move the tile up and down, let the silicone litter in the inside and discharge the air, then follow the number of numbers labeled on the fixed screw on the heat sink(Or press the diagonal)Tighten up again, rotate a screw each time, do not rotate a screw in a time, rotate next to fixed balance.
Note: After the CPU is changed, if it is found that the CPU temperature is too high, or when the temperature is high, it is not stable, please take care of the above three items, and check whether the silicone quality is too bad. Most problems can be solved like this.