RTL8156 chip 2.5G network card
I have a NAS server of Synology. I heard that I can install a USB 2.5G network card. I bought one and tried it. The process was quite complicated, but in the end it was successful.After many introductions, I followed the introduction step by step. If you want to try it, you can first introduce the driver on the Internet first, drive down and then buy a network card, export foreign trade models, and pack them in English.
Like a computer, it is relatively simple. Generally, the new system is admitted. If you want to use the driver of the chip manufacturer, you need to install it separately. I put one on the cloud disk to download it for everyone. The address is: https: // share.weiyun.com/wlv0zv5q There are two interfaces: USB and Type-C are optional. It should be explained that the power of 2.5G is relatively high than the Gigabit. I try to pick up the USB HUB and find that there will be insufficient power supply.It is not recommended to go directly to HUB.
With a driving disc, contains Linux/Mac/Windows/UEFI and other system drives, there is no optical drive to download on my cloud disk
https://share.weiyun.com/3kToYO3n
Installed screenshots on the NAS server
Installed on the computer:
The manufacturer gives the picture as follows:
After the actual measurement is inserted on the computer, if the network cable is not connected, it will be turned on after connecting the network cable. The green light is below 1000m and the yellow light is 2500m. It needs to be used with a router or switch with a 2.5G network card.My own home is 2.5G of a TPLINK The switch is used to use a group of internal 2.5G LAN.
A few selfies on mobile phones: