This set of bracket base kit can be installed on the guide rail of the passenger seat of the car, does not occupy space, does not need to make holes, and belongs to non-destructive installation.
This product can be combined with various back clip kits to form a complete set of brackets.
It can be used with various back clips of ram mount to install mobile phones, tablets, ipads, GPS, etc.
This product has two packages of 1 inch B type and 1.5 inch C type. It comes with B type or C type disc ball head, which can be directly connected to RAM flat back clip or navigation back clip.
Type B is suitable for lighter devices such as ordinary tablets and mobile phones. Type C is suitable for larger devices such as 12-inch tablets.
Note: 1.5 inch series means that the joint at the top is 1.5 inches(38mm), can only fit with a diameter of 1.5 inches(38mm)Series of ball head and support arm and other modules are used.
The larger the diameter of the ball head, the better the firmness of the overall bracket. Usually 1-inch poles are suitable for mobile phones or 7-inch 8-inch tablets, and 1.5-inch poles are suitable for 10-inch tablets. Of course, 1.5 inches can also be equipped with mobile phones or small tablets.
The rest of the connecting rod base is of the same size, with a solid aluminum alloy rod in the middle, which can be bent.
The picture below is a comparison of 1 inch and 1.5 inch head joints. The two disc ball heads in the picture are for demonstration purposes and are not included in the product on this page.