Don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t worry about the wiring problem. Before shipment, we will cut off the fan''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s other redundant wires, leaving only the fan''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s power cord in a set of positive and negative wires. After receiving it, you only need to directly connect the power supply to start.(The red and orange wires are connected to the positive electrode at the same time, and the black and gray wires are connected to the negative electrode at the same time)The positive and negative wires can be connected to the 7V-12V power supply!
A set means: a set of fans(Two small fans)+Protection cover*2+Fixed screw*4
SANYO DENKI(Yamayo)It is a well-known Japanese instrument and meter and server system manufacturer and supplier. At the same time, small cooling systems and fan products are also world-renowned.
SANYO DENKI relies on 80 years of industry experience, adhering to the usual craftsmanship level of traditional Japanese companies, and meticulous work.
As one of the main products of SANYO DENKI, fan products continue the high technical standards of SANYO DENKI and are recognized as high-quality fan products worldwide.
The official parameters are as follows:
Product Type: DC Axial Fan
Region/Country: Japan
Brand: Sanyo
Manufacturer: Sanyo Electric Group SANYO
Model: 9CR0412S5143
Dimensions: 40*40*56mm
Hole distance: 3.3cm
Rated voltage: 12V
Use range: 8~13.2V
Rated current: 1.1A
Input power: 13.2W
Fan bearing: four balls
Maximum speed: 16000RPM±5%(
Maximum air volume: 30CFM--0.85m3/min
Maximum static pressure: 500Pa--2.0H20
Noise: 62dB
Interface: Mainly connect 4 wires, the positive pole connects to the red + orange wire, the negative pole connects to the black + gray wire
Line length: 7cm
Weight: 207g
Durability time: 50,000 hours
Place of Origin: Sanyo Philippine production base in Japan
Every fan will be delivered
2 protective net covers, 4 mounting screws, 1 manual switch, making it more convenient for you to modify
Dear friends,The shopkeeper can only say,The basic principle of this fan is that the greater the throttle, the better the boost effect!I’m also just a dealer, and all I know comes from refitted buyers. The key is to look at the creativity of my parents.After all, modification also requires a certain amount of hands-on ability!
The gospel of riders, the supercharger modification artifact of motorcycle battery car!
The fan itself is used on the server. It can be turned on for 24 hours. After modification, it can be used for heat dissipation, air-cooling and supercharging of motorcycles/cars, which can save fuel, increase speed, and extend the service life of motor vehicles.
The general modification of motorcycles is as follows
1 First; remove a filter in the middle of the filter element, and connect the fan to the carburetor tube(It can also blow heat directly against the engine)
2 Then: Remove the screws on both ends of the fan and turn the feet into a round shape. When the tube is softened with hot water, put the air outlet end into the end of the carburetor and the rest is connected to the air filter.(You can also empty the filter box directly)
Red line + orange lineThe positive pole after connecting the electric door lock(FireWire), Black line + gray
Wire to battery negative(Zero line)
The fan itself is used on the server. It can be turned on for 24 hours. After modification, it can be used for cooling, supercharging, etc. on motorcycles and cars...
Note: if the battery/power supply is connected to DC 12V 7A or less, the black + gray wire is connected to the negative pole, and the red + orange wire is connected to the positive pole.