Thanks for purchasing ezcap280 HD Video Capture. The following guides you how to set up on your
computer. Hope this device will bring you nice digital experience.
With this ezcap280 HD Video Capture, you can capture 1080P video from HDMI or Ypbpr port, such
as blue ray, set-top-box, computer, game box, etc.
Features/ports and buttons:
1. OUTPUT—HDMI output, pass through
display HDMI or Ypbpr video.
2. INPUT—HDMI input.
3. YPBPR INPUT—Ypbpr component input.
4. PWR—DC 5V power supply.
5. USB HOST—For plug USB flash drive or
USB HDD for saving record files.
6. LINE IN—For connect audio in when
capture from DVI (with DVI to HDMI
connector) port of computer.
7. MIC—For connect a microphone and
record voice comments when play game.
8. LINE OUT—Audio output.
9. LED indicator—Color be green when
standby, be red when recording.
10. REC button—Press to record/stop.
How to play:
1, Connect power with DC adaptor
2, With component cable connect
to PS3 or other source .
3, Use HDMI cable connect Xbox
or other source.
4, With HDMI cable connect to
monitor
5, The “LINE OUT” is for connect
to speaker or earphone.
6, You can connect your
microphone to record your
comment when play game.
7, Plug an USB disk on.
8, If you want record from computer (game or video) with DVI port, you can use a DVI to HDMI cable
to connect, and the line out of computer connect to line in of ezcap280, like following picture:
9, Press the REC button to capture the playing video, you will see the LED indicator turn red from
green. Press REC button again to stop capturing, will see LED indicator flash few seconds then turn
green.
10, After you stop recording, connect the USB flash to computer, will see the recorded files: for 1080P
recording, file will be Encode_1080P_1, for 720 or 480p recording, file will be Encode_1.
Every record/stop operation will create a different recording file: Encode_1080P_1, Encode_1080P_2,
Encode_1080P_3… and so on.
The max size per file will be around 1.95GB (around 15 minutes for 1080p video), when you record a
video more than 1.95GB(15 minutes), ezcap280 will partition it in more than 1 file, for example: if you
record a 45 minutes 1080p video by one click recording, you will see 3 files: Encode_1080P_1,
Encode_1080P_1_1, Encode_1080P_1_2…and so on
11, Update firmware: you may need update firmware for this device for some reason. Copy the
firmware file in to USB disk, power off the device (unplug power jack), plug USB disk to device, power
on, the indicator will flash 7~8 seconds, then the update is finished.
12, After long time using, you will see the number of recording file become too big, for example
Encode_1080P_234, but you want it be start from Encode_1080P_0, to do it you just keep press
record button(before power on), then plug the power jack to power on the device, after 3 seconds, the
file number will start from 0.