Hardware specifications |
Product number | RG-AP530-I | RG-AP530-I V2 |
scenes to be used | RG-AP530-I is a high-performance and wide-coverage AP with spectrum analysis capabilities and is suitable for most general scenarios. | RG-AP530-I (V1.50), the hardware is suitable for V1.5X, is a small cell low-power design AP, and supports dual 2.4G/dual 5G features, especially suitable for small-scale high-density deployment scenarios. Such as e-schoolbag classrooms, flipped classroom applications, etc. | RG-AP530-I V2 improves the anti-interference performance and receiving effect on the basis of RG-AP530-I. It is especially suitable for multi-user concurrent scenarios with complex radio frequency environment. The low-power design can save power more effectively. Universal AP. |
RF design | Dual-channel dual-frequency design |
Transfer Protocol | Dual radio frequency card design, can support 802.11b/g/n and 802.11a/n/ac working at the same time | Dual radio frequency card design, each radio frequency card can be independently set to any working mode: 2G+2G/2G+5G/5G+5G | Dual radio frequency card design, can support 802.11b/g/n and 802.11a/n/ac working at the same time |
Working frequency | 2.4GHz and 5GHz |
Antenna type | X-Sense smart antenna array with built-in 24 antenna combinations | Built-in antenna | Built-in antenna |
Number of spatial streams | Three-space flow |
Transmission rate | A single radio frequency card provides a maximum access rate of 1300Mbps and 600Mbps, and the whole machine provides a maximum access rate of 1900Mbps | A single radio frequency card provides a maximum access rate of 1300Mbps and 1300Mbps, and the whole machine provides a maximum access rate of 2600Mbps | A single radio frequency card provides a maximum access rate of 1300Mbps and 450Mbps, and the whole machine provides a maximum access rate of 1750Mbps |
Modulation technology | OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and CCK@5.5/11Mbps MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM |
Receiving sensitivity | 11b: -96dBm(1Mbps), -91dBm(5Mbps), -89dBm(11Mbps) 11a/g: -91dBm(6Mbps), -83dBm(24Mbps), -79dBm(36Mbps), -74dBm(54Mbps) 11n: -88dBm@MCS0, -70dBm@MCS7, -85dBm@MCS8, -67dBm@MCS15 11ac HT20: -88dBm(MCS0), -63dBm(MCS9) 11ac HT40: -85dBm(MCS0), -60dBm(MCS9) 11ac HT80: -82dBm(MCS0), -57dBm(MCS9) |
Transmit power | ≤100mw(20dBm, only RF card transmit power) |
Adjustable power granularity | 1dBm |
size | 220mm×220mm×42mm(Length×width×height, the height is the height of the edge of the host, without modeling and hanger) | 220mm×220mm×42mm(Length×width×height, the height is the height of the edge of the host, without modeling and hanger) | 205mm×205mm×42mm(Length×width×height, the height is the height of the edge of the host, excluding the shape and hanger) |
weight | 1.5kg |
Business port | 1 10/100/1000Base-T Ethernet port(Support PoE power) 1 10/100/1000Base-T Ethernet port |
Management port | 1 console port |
Anti-theft lock | stand by |
Status Indicator | Single indicator light(Red, green, blue, orange and flashing mode, terminal access to breathing flashing mode, silence can be turned off) |
Power supply | Provide DC power adapter interface, support local power supply(DC 48V) |
Support PoE+ Power over Ethernet(802.3at, 30W standard) | Support PoE+ Power over Ethernet(802.3at, 30W standard) | Support PoE Power over Ethernet(802.3af, 15.4W standard) |
Total power | <20W | <20W | <12.95W |
surroundings | Working temperature: -10°C~55°C |
Storage temperature: -40°C~70°C |
Working humidity: 5%~95%(No condensation) |
Storage humidity: 5%~95%(No condensation) |
Installation method | Ceiling, wall hanging, etc. |
Protection level | IP41 |
Safety regulations | GB4943, EN/IEC 60950-1 |
EMC regulations | GB9254, EN301 489 |
Radio Frequency Regulations | Wireless transmitting equipment model approval, EN300 328, EN301 893 |
Wi-FiAlliance certificate | stand by |
Software function |
WLANFeatures | Maximum number of users connected to the whole machine | 256 |
Recommended number of users connected to the whole machine | 64 |
Virtual AP service | The whole machine can be divided into up to 32 |
SSID hidden | stand by |
Each SSID can be configured with a separate authentication method, encryption mechanism, and VLAN attributes | stand by |
WDS(Bridge mode) | stand by |
Edge IntelliSense(RIPT) | stand by |
Intelligent load balancing based on the number of terminals or traffic | stand by |
User limit | Support SSID-based user limit Support the limit of the number of users based on the radio frequency card |
Bandwidth limit | Support speed limit based on STA/SSID/AP |
security function | Support PSK, WEB, 802.1X and other authentication methods | stand by |
data encryption | Support WPA(TKIP), WPA2(AES), WPA-PSK, WEP(64/128 bit) |
Support QR code visitor authentication | stand by(Realized by RG-WS series wireless controller) |
Support SMS authentication | stand by(Realized by RG-WS series wireless controller) |
Support non-perception authentication | stand by(Realized by RG-WS series wireless controller) |
Data frame filtering | Support whitelist, static blacklist, dynamic blacklist |
User isolation | stand by |
Illegal AP detection and countermeasures | stand by |
Dynamic ACL delivery | stand by |
Radius protocol | stand by |
CPU protection strategy(CPP) | stand by |
Basic network protection strategy(NFPP) | stand by |
Routing switch function | IPv4 address | Support static IP address or DHCP acquisition |
IPv6 CAPWAP tunnel | stand by |
ICMPv6 | stand by |
IPv6 address | Support manual configuration and automatic creation |
Multicast | stand by |
Management and maintenance | Network management | Support SNMP v1/v2C/v3 Support through Telnet, SSH, TFTP management Support WEB management |
Fault detection and alarm | stand by |
Information statistics and logs | stand by |
Fat/Fit mode switch | When working at Fit(thin)In mode, it can be switched to Fat mode through the WS series wireless controller When working at Fat(fat)In mode, it can be switched to Fit mode through the local control port and Telnet |