Cartoon tennis shock absorbers can be customized
Every time you hit the ball, the string of the racket will vibrate, which is transmitted to the racket body and then to the handle. The size of this vibration is different due to the material of the racket, and the technology used is also different, but there is no racket that can completely Vibration is eliminated. Therefore, for amateur players, it is necessary to minimize the vibration transmitted from the racket to the arm when hitting the ball. At this time, the methods that can be used include the use of shock absorbers. Although some people say that the use of shock absorbers will reduce the feel when hitting the ball, but the lack of some feel is always more cost-effective than tennis elbow. Some rackets will be given with shock absorbers when they are purchased, but the style may not be what you like. It is recommended that beginners use shock absorbers, because they do have a certain effect on reducing vibration.
The shock absorber particles can be summarized into three shapes in appearance, namely granular, ribbon and rectangular parallelepiped. These three kinds of shock absorbers can be seen in the club shop, but what is really special is the three kinds of shock absorbers.“Variation”, Such as Wilson''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s spherical shock-absorbing particles, Dunlop''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s cylindrical strip-shaped shock-absorbing particles, and Head''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s butting-type shock-absorbing particles. The installation method of these odd-shaped suspension particles is similar to the first three types of suspension particles.
Suspension particles are usually installed below the lowermost horizontal string of the racket and on the vertical strings in the middle. Here are three ways to install the suspension particles: Granular suspension particles usually have grooves on both sides of the string. The groove can be stuck between the two strings, so you can first buckle the groove on one side into the string, and then buckle the other side into the string, and then push the shock absorber to the bottom of the racket. The string is fine; the belt-shaped shock absorber is usually longer and can be stuck between 6-10 strings. It can be passed through the inner and outer sides of the string alternately, and then both sides can be hung on the string. In addition, , Some belt-shaped shock absorbers also have grooves in the middle of the strings. The installation method is the same as the ones without the grooves, except that these grooves need to be clamped on the strings in turn; the rectangular suspension particles can usually jam four strings, respectively For the grooves on the two sides or one side of the suspension particles, you only need to clamp the two in the middle, and then clamp the two sides on the strings.
The larger the contact area between the shock absorber and the ball line, the better the shock absorption effect, but the corresponding loss of hand feeling when hitting the ball is the feeling“Wood”Some. We often feel the power and speed of the ball through the vibration of the racket. Although too much vibration damages the arm, too little vibration will also lose the ball feel.