H3C WAP723-W2 indoor 802.11ac wireless access equipment
H3C WAP723-W2 wireless product is a new generation of high-end Internet of Things products independently developed by Hangzhou Huasan Communication Technology Co., Ltd. (H3C). It adopts three-band 802.11AC design and dual-band 802.11ac Wave2 design can be widely used in high-density user access. And electronic schoolbags and other scenes.
All WAP723-W2 products have built-in antenna arrays, support access to three frequency bands, compact and beautiful appearance, flexible installation methods, suitable for wall-mounted, ceiling-mounted and other installation methods. At the same time, a universal external module can be used on the device to increase the access of a variety of Internet of Things wireless methods. The extended method can support any combination of standard T300 series interface modules such as RFID, ZigBee, Bluetooth, etc. The T300 series modules can be serialized through RJ45. Then deploy.
Industry-leading three radio frequency innovative design
The traditional wireless access AP usually adopts a dual-frequency scheme, which provides wireless signal access in two frequency bands of 2.4GHz and 5GHz respectively. The H3C WAP723-W2 product innovatively adopts a tri-band design, while retaining the original dual radio frequency. With the continuous development of technology, 5G 802.11ac Wave2 terminals have gradually become the mainstream, and the 2.4G frequency band of APs has gradually become compatible with low-end terminals. With the addition of a third radio frequency module in WAP723-W2, the highest access rate can be achieved. 2.134Gbps, very suitable for use in e-schoolbag scenarios and high-density access scenarios.
Realize the simultaneous communication of multiple terminals and break through the disadvantages of traditional wireless competition
H3C WAP723-W2 supports MU-MIMO technology. MU-MIMO is the most important feature of 802.11ac Wave 2. Through MU-MIMO technology, the AP can send data to multiple terminals at the same time, that is, WAP723-W2 can be multiple terminals at the same time Sending data information, according to the number of terminal streams, the perfect combination of the three-frequency design of the whole machine and MU-MIMO, the whole WAP723-W2 can send wireless messages for up to 4 terminals at the same time, breaking the traditional wireless network serial communication mechanism , The utilization rate of wireless spectrum resources has been doubled, the number of effective access users has been greatly increased, the deployment overhead of wireless networks is effectively reduced, and the user experience in the case of high-density users is improved.
Realize smart dual gigabit cloud access and high-quality wireless network TCO
WAP723-W2 complies with the 802.11ac protocol standard and can provide access to 3 different frequency bands. WAP723-W2 achieves a wireless transmission rate of 867Mbps+867Mbps+400Mbps. With built-in antenna coverage technology, it can effectively provide higher-performance mobile cloud access services in terms of coverage, access density, and stable operation, and assist users in achieving high-quality wireless network TCO (Total Cost of Ownership) .
Green and low-carbon design
WAP723-W2 adopts a professional green low-carbon design, supports dynamic MIMO power saving mode (DMPS) and enhanced automatic power saving transmission (E-APSD), intelligently identifies the actual performance requirements of the terminal, rationalizes the deployment of terminal sleep queues, and dynamically adjusts the MIMO working mode .
WAP723-W2 supports Green AP mode to achieve single-antenna standby and more accurate energy saving.
WAP723-W2 uses innovative packet-by-packet power control (PPC) technology to dynamically adjust the direct two-way power of the AP device and the client under the premise of ensuring that the message can be successfully transmitted, so as to reduce the energy consumption of the device and extend the standby time of the mobile terminal The role of.
Provide local forwarding function
When WAP723-W2 (Fit mode) is forwarded through the WAN, the wireless access device is deployed in the branch and the wireless controller is deployed in the headquarters. All user data is sent by the wireless access device to the wireless controller, and then the wireless controller Perform centralized forwarding. WAP723-W2 can directly convert data messages into wired format messages on wireless access devices, so that data messages do not pass through the wireless controller but are forwarded locally, which greatly saves wired bandwidth.
Support IPv4/IPv6 dual protocol stack (Native IPv6)
WAP723-W2 fully supports IPv6 features, and the device implements an IPv4/IPv6 dual protocol stack. Regardless of whether the original wired network is IPv4 or IPv6, it can automatically register with Beckham''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s MSG series multi-service gateways and WAC series wireless controllers to provide WLAN services, and will not become an information island in the network.
Support RealTime Spectrum Guard (real-time spectrum protection) mode
RealTime Spectrum Guard (RTSG) is an innovative professional monitoring solution for wireless environment spectrum status proposed by H3C. WAP723-W2 supports built-in RF acquisition module to achieve deep integrated RF monitoring and real-time spectrum protection.
The RTSG console is integrated and deployed in the H3C iMC Intelligent Management Center. It manages the tunnel through CAPWAP, communicates with the Sensor AP and collects data, to achieve 7X24 hours of wireless environment quality monitoring, wireless network capability trend assessment, and unlicensed interference alarms. Through graphical methods, actively detect and identify all 2.4GHz/5GHz radio frequency interference sources (Wi-Fi or non-Wi-Fi), and can provide real-time FFT graphs, spectral density graphs, spectrum graphs, duty cycle graphs, and event spectra Map, channel power, interference power, etc.; it can automatically identify the source of interference, determine the location of the wireless device in question, and ensure that the wireless network performs better. Combined with the H3C iAR intelligent report component, it can realize the storage, traceability, and playback of radio frequency quality history records in the entire coverage area, and automatically generate customized trend, compliance and audit reports.
In response to the different levels of users'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' wireless environment supervision requirements, the deployment of the RTSG solution can flexibly adopt Local mode or Monitor Mode. When working in Local Mode, it can maintain normal user access and data packet forwarding under the premise of effective spectrum protection.
Provide EAD wireless access
The End user Admission Domination (EAD) solution starts from the perspective of controlling the secure access of user terminals to the network, integrates network access control and terminal security products, and enforces corporate security policies for user terminals that access the network. Linked with the security policy server, it can be used to offline, isolate, remind, or monitor unqualified wireless clients that are infected with viruses or have system vulnerabilities, etc., and only the wireless clients are allowed after they comply with the corresponding security policies. Access the network normally, thereby improving the overall security of the wireless network.
Support remote probe analysis
WAP723-W2 supports the Sensor device as a remote probe analysis, which can listen and capture Wi-Fi packets in the coverage area and mirror them to the local analysis device in real time for network administrators to troubleshoot and optimize analysis. The remote probe analysis function can not only perform non-convergence mirroring for the working channel, but also poll and sample all channels to flexibly meet the requirements of wireless network monitoring, operation and maintenance.
Built-in radio frequency optimization engine (ROE)
WAP723-W2 has a built-in RF Optimizing Engine. Through feature and protocol-based RF optimization, it effectively improves application acceleration and quality assurance effects in scenarios such as high-density access and streaming media transmission in wireless deployment. These include: multi-user fair scheduling, mixed access fairness, interference filtering, optimal rate, spectrum navigation, multicast enhancement (IPv4/IPv6), packet-by-packet power control, and intelligent bandwidth guarantee, etc.
Support intelligent load balancing
WAP723-W2 supports a complex balancing method based on the number of access users and traffic. When the wireless controller finds that the load of the wireless access device exceeds the set threshold, the wireless controller will automatically calculate this user for the newly connected user Is there a wireless access device with lighter load around for users to access? If there is, the user’s association request will be rejected, and the user will switch to other wireless access devices with lighter load, but if the wireless users are not overlapping In the coverage area, traditional load balancing methods often lead to failure to connect to the network and cause misbalances. H3C innovatively supports intelligent load balancing technology to ensure that the load balancing function is activated only for wireless users in overlapping coverage areas, effectively avoiding the occurrence of misbalances, thereby maximizing wireless network capacity.
Support Chinese SSID
WAP723-W2 supports the use of Chinese SSID, which can specify an SSID containing up to 16 Chinese characters, or a mixed Chinese and English SSID, which provides greater convenience for domestic users.
Fully support intelligent wired and wireless integrated management
All H3C wireless products can realize integrated wired and wireless management based on WSM through an open network management protocol.
WSM is a wireless operation management component developed by H3C on the basis of the next-generation business software platform iMC (Intelligence Management Center/Intelligent Management Center). It not only provides administrators with flexible component selection, but also conforms to the mainstream SOA architecture in the industry. The scalability can meet the evolving needs of customers'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' network management. The Web-based management system provides a simple and friendly management platform for wireless business managers. Cooperating with the iMC intelligent management platform and other components, it can also realize wireless device panel management, fault management, performance monitoring, software version management, configuration file management, access user management and other functions, and can unify other devices in the network Management, truly realize intelligent wired and wireless integrated management.
Hardware specifications
Attribute | WAP723-W2 |
Weight | 0.728 |
Dimensions (not including antenna interface and accessories) | 215mmx215mmx47.5mm |
1000M Ethernet port | 1 piece |
IoT interface | 1 piece |
PoE | Support 802.3at compatible power supply |
Local power supply | Support 54V DC |
Console port | 1 piece |
Built-in antenna | Built-in antenna system (working frequency band: 2.4G and 5G, the maximum gain of the whole machine can reach 7dBi) |
Working frequency | 802.11ac/n/a: 5.725GHz-5.850GHz; 5.15~5.35GHz (China) 802.11b/g/n: 2.4GHz-2.483GHz (China) |
Modulation technology | OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps MIMO-OFDM(11n): MCS 0-15 MIMO-OFDM(11ac): MCS 0-9 |
Modulation method | 11b: DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM:64QAM@48/54Mbps,16QAM@24Mbps,QPSK@12/18Mbps,BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM |
Transmit power (single channel maximum) | 20dBm |
Adjustable power granularity | 1dBm |
Reset/restore factory configuration | Support |
Status Indicator | Blink alternate blinking mode, orange, green and blue blinking mode in different working states, terminal access breathing blinking mode |
Working temperature/storage temperature | 0ºC~45ºC/-40ºC~70ºC |
Working humidity/storage humidity | 5%~95% (non-condensing) |
Protection level | IP41 |
Anti-theft lock | Support |
Whole machine power consumption | <30W |
safety regulations | GB4943, EN60601-1-2 (medical), UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22 |
EMC | GB9254, EN301 489, EN55022, FCC Part 15, RSS-210 |
RF certification | FCC Part 15, EN 300 328, EN 301 893, Model Approval of Radio Transmission Equipment by the Ministry of Industry and Information Technology |
Health | FCC Bulletin OET-65C, EN 50385, IC Safety Code 6 |
MTBF | >250000H |
statement:Because the manufacturer will change the product packaging, origin or some accessories without any advance notice, the company cannot ensure that the goods received by the customer are completely consistent with the store pictures, origin, and accessories. It can only be guaranteed to be the original factory! And to ensure that it is consistent with the same mainstream new products on the market at that time. If this shop is not updated in time, please forgive me!
Attention buyers who require invoicing: The invoice and the goods will be sent together for non-special circumstances,The invoice is placed in the corresponding express bag, Please pay attention to checking and receiving the goods! If not, contact the customer service staff in time on the same day. If the invoice is lost due to the buyer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s inspection, we will not be responsible for it! beg to be excused!
>Buyers must read
Delivery Method
1. Pick up at home
Matters needing attention:
1.Self-pickup time: Monday to Saturday, 09:00-18:00(In case of national statutory holidays, the holiday time published by this franchise store shall prevail. Please pay attention to it then)
2.Self mention location: South Gate of Haidian Book City (Zhongguancun), Haidian District, Beijing
3.Self-promotion contact: Mr. Liu Miss Xiao
4.Contact phone number:010-62526296 15010428840 13241275194
5. Before coming, please make an appointment with the customer service in advance, and specify the specific model and price.
two·Payment method
1. For customers who pick up at home, Alipay can be used to pay, or cash/check/card transfer three payment methods are accepted
2. Choose the check payment method, the customer needs to fill in the check content completely by himself(The payment is 5,000 yuan or more, and the goods can only be picked up after the payment has been received); Do not accept checks with passwords.
Three·Express shipping
1. The express delivered by our shop is delivered according to the express company selected by the customer service staff and the customer at the time. If no express delivery is discussed, the delivery will be delivered by the monthly settlement express company that can reach the customer and signed by the company by default.(As a monthly settlement customer, the safety of the goods is guaranteed). If there is any change, please inform the customer service staff by Wangwang or phone before 6:00 pm. After 6:00 pm or the goods have been sent out, they cannot be changed.
2. Delivery time: The goods photographed and paid on the same day will be shipped before 6:00 pm every day. If the goods are photographed and paid in the evening, the goods will be sent out in the morning or afternoon of the next day, and it may be postponed on holidays.
Four. After-sales service
1.All products sold in our shop will be returned, exchanged and repaired in case of quality problems, and strictly in accordance with the three guarantees of relevant national products (refundable, exchangeable, and repairable within 7 days; exchangeable within 8-15 days, Repairable (this shop is extended for one month)). The service time for return, exchange and repair shall be counted from the date of receipt of the goods. The return and exchange service does not include the following situations: man-made damage, damage caused by improper use, damage caused by force majeure(Earthquake, fire, etc.)And the product was disassembled.
2. Freight issues arising from returns, exchanges and repairs:
1)Within seven days after the receipt of the goods, if there is a quality problem with the goods themselves, the shipping costs for the return and exchange shall be borne by the seller; within the warranty period seven days after the receipt of the receipt, due to the quality problems of the goods themselves, the buyer and the seller shall bear their own shipping costs. freight;
2)If it’s not the quality of the goods, it’s just that the customer didn’t read the instructions carefully(Or do not consult our shop in detail), And cause the goods to be unsuccessfully used, and the freight caused by the misjudgment of return shall be borne by the buyer.
3.Judgment of product quality
If the product has quality problems, please go to the manufacturer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s after-sales service center for testing and issue a test report(If the after-sales service center of some manufacturers cannot provide the test report, a maintenance inspection document is required)If the test report confirms that it is a quality problem, then return the test report, the defective product and the complete packaging accessories to our company for return and exchange procedures. If it is damaged or lost, we will not be able to handle it for you.
4.In particular, the following circumstances will not be processed for return and exchange:
1)Any products not sold in our shop(Serial number does not match);
2) For out-of-insured goods(Goods beyond the warranty period of three guarantees)The warranty will not be accepted;
3) Product quality problems caused by unauthorized maintenance, misuse, collision, negligence, abuse, liquid intake, accident, alteration, incorrect installation, or tearing up, altering labels, machine serial numbers, anti-counterfeiting marks, or not returning Within the scope of cargo service;
4) The product''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s outer packaging, attachments, manuals are incomplete, the invoice is missing or altered, and no return or exchange service will be provided;
5) Non-commodity quality problems, such as compatibility problems, dissatisfaction with color, appearance, shape, etc., are not quality problems and are not within the scope of return and exchange services;
6) The normal wear and tear of the goods is not within the scope of return and exchange services;
7) The faults that can be eliminated through software upgrades for digital and IT products do not belong to the scope of the three guarantees, as long as they are sent to the local manufacturer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s designated or special after-sales service center for upgrade.
8) Open the original packaging of the sealed product(Such as a one-time seal or tape seal is opened);
9) The product has been used.
Invoice system description
1.How to get an invoice
(1)This shop guarantees that the goods sold are all authentic and licensed, and the shipment does not contain any documents by default.
(2)Most goods can provide invoices,But the invoice is not attached by default when shipping,If the buyer needs an invoice,Please specify in advance and leave a message on the invoice header in the order(Name of payer unit).
(3)The invoice does not include the freight amount.
2.Set up invoice information
invoice type(Ordinary invoices, value-added tax invoices),Invoice(personal company),invoice content(Details, office supplies, computer accessories, network equipment), The contents of the invoice header Cannot be empty, you can choose personal or company name.
3.Notes on invoicing
(1)To provide17%Increase votes(Need to add7%Tax), Please explain in advance before purchasing, and provide billing information(Including: the full name of the company/Tax number/Address and telephone/Account bank and account number). Can be used as a unit deduction.