Unimaginable sound return
-Dual mono ultra-wide bandwidth zero feedback amplifier circuit
-Each channel provides 120 W (8 Ohm load), 240 W (4 Ou Load) and 440 (2 Ohm load) continuous output power
-Zero feedback fully balanced amplifier circuit
-A 46-segment progressive audio control system switched on and off by a microcomputer, the signal will only pass through 6 resistors arranged in series, mainly composed of low inductance sealed gold-plated contact relays and metal skin resistors.
-PS II MM/MC phono module and Diablo 120 D/A dedicated decoder module can be added
-Configuration 70μm Fully sealed double-layer and 4-layer printed circuit boards of high-purity copper foil to further shorten the signal path
-The 1,200 VA special toroidal transformer is equipped with independent taps for the left and right channels, and its chip and coil windings have undergone special vacuum treatment to further eliminate unnecessary resonance interference
-120,000 microfarad energy reserve
-Neutrik XLR directly connected to the circuit board and RCA terminal with PTFE as the insulating material, no additional wiring and soldering are required
-Fixed output AV through car interface specially designed for AV system
-Light touch control backlit front baffle, equipped with a vacuum tube fluorescent display screen that can be adjusted for multiple different brightness levels
-A complete protection system that does not affect the sound effect in any way, providing comprehensive protection for the safety of the equipment and users themselves.
Diablo 120 parameter specifications:
Output power: 2 x 120 W (8 ohm load), 2 x 240 W (4 Ohm load)
Peak output: 2 x 440 W (2 Ohm load)
Preset bias current for forced release: Class AB
Signal-to-noise ratio (A-weighted): less than -88 dB
Distortion rate (THD+N): less than 1%, (120 W calculation)
Input sensitivity: 0.39 V
Gain: 38 dB
Frequency response (-3 dB): 0.1– 250 kHz
Input impedance (balanced, 20–20 kHz): 20 kΩ
Input impedance (RCA, 20–20 kHz): 8 kΩ
Output impedance (20–20 kHz): 0.03 Ou
Analog input: RCA x 3, XLR
Analog output: RCA Tape Out
Dimensions (H x W x D): 175 x 480 x 420 mm
Weight: 26.2 kg