American NI PCI bus 32-way 80M DIO data acquisition card 777531-01 PCI-6602
NI PCI-6602 and necessary accessories
NI PCI-6602 -777531-01 | quantity: 1 | | RMB 6,914/Each |
Necessary accessories |
Junction Box-BNC terminal
| quantity: 1 | | RMB 3,767/Each |
cable-Block
| quantity: 1 | | RMB 1,609/Each |
Notice:
1. The price in this order is only the price of a single capture card. If you need accessories, you can calculate the price according to the above price, and you can contact the customer service staff to confirm and place the order;
2. This product has an ordering period of 6-10 weeks, you can contact customer service to confirm whether it is in stock before placing an order!
Overview:
The 6602 series are timing and digital I/O modules for PCI computers or PXI/CompactPC computers. The product has 8 32-bit counters/timers and 32 TTL/CMOS compatible digital I/O lines. You can use the 6602 series devices to perform a wide range of counter/timer measurement tasks, including encoder positioning measurement, event counting, period measurement, pulse width measurement, pulse generation, pulse sequence generation, and frequency measurement.
describe:
- 8 up/down 32-bit counters/timers
- The maximum source frequency is 80MHz (using prescaler up to 125MHz)
- Can perform 3 simultaneous high-speed DMA conversions
- 32 digital I/O lines (5V/TTL)
- Digital Debounce Filter
- For PCI computer
Specifications:
Specification summary
Overview |
product | PCI-6602 |
Product Series | Counter/timer |
Bus type | PCI |
Product number | 777531-01 |
Operating system / object | Real-time system, Linux, Mac OS, Windows |
Measurement type | Quadrature encoder, digital, frequency |
Compliance with the RoHS directive | no |
Analog input |
Number of channels | 0 |
Single-ended channel | 0 |
Differential channel | 0 |
Analog output |
Number of channels | 0 |
Digital I/O |
Two-way channel | 32 |
Input channel only | 0 |
Output channel only | 0 |
Number of channels | 0 , 32 |
timing | software |
Logic level | TTL |
Input Current | Leakage current, source current |
Output current | Leakage current, source current |
Programmable input filter | Yes |
Support programmable power-on state? | no |
Single channel current drive capability | 4 mA |
Watchdog timer | no |
Support handshake I/O? | no |
Support mode I/O? | no |
Maximum input range | -0.3 V , 5 V |
Maximum output range | 0 V , 5 V |
Counter/timer |
Number of counters/timers | 8 |
Number of DMA channels | 3 |
Buffer operation | Yes |
Short-term pulse interference cancellation | Yes |
GPS synchronization | no |
Maximum range | 0 V , 5 V |
Maximum signal source frequency | 80 MHz |
Minimum input pulse width | 6.25 ns |
Pulse generation | Yes |
Resolution | 32 bits |
Time base stability | 50 ppm |
Logic level | TTL |
|
|
|
|
|
|
|
Physical standards |
length | 17.5 cm |
width | 9.9 cm |
I/O connector | 68-pin SCSI-II type male connector |
Timing/triggering/synchronization |
trigger | number |
Synchronous bus (RTSI) | Yes |
Data Sheet (English)Click to download the official literature!
BNC-2121 |
| - BNC and spring terminal connection
- Generate test pulse train, trigger signal and quadrature encoder signal
- Easily connect I/O signals to 660x devices
- Download the file in PDF format to get the compatibility chart, more detailed product description and ordering guide
|
Overview The junction box with BNC and spring terminal connection device can easily connect with the counter/timer to realize the I/O signal connection. BNC-2121 provides 8 dedicated BNC interfaces, 6 user-defined BNC interfaces and spring terminals for connection All I/O signals. At the same time, as a full-featured test accessory, the junction box can display pulse sequences, trigger signals and quadrature encoder signals, and users can use this to perform counter/timer experiments. |
Data Sheet (English)
SH68-68-D1 |
| - Connect 68-pin high-speed counter/timer and 68-pin accessory
- The length is divided into 0.4m, 1m, 2m and 5m
- Download the file in PDF format to obtain product compatibility charts, product details and ordering information
- Shielded cable
|
Overview Shielded 68-pin cable, with a 68-pin female 0.050 series D-type connector at each end. This cable connects the counter/timer and accessories. |
Data Sheet (English)