Powerslide HAWK ——AutumnseasonwindBeach landing It is not difficult for ps fans to find that this brand new hawk has evo, s4, and s3 figures, combined with ps technology, a brand-new custom-made shoe with high cost performance for flat flower players, breaking through high performance and low price. Restrictions are undoubtedly a low-budget choice for students and another weapon for the majority of players.
Now buy a pair of shoes, get a DC bag, a set of bull''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s head protective gear, a shoe lifter, a pair of charcoal bag, and a pair of shoe covers! 20 piles. You don’t need to take pictures and pay directly for the things you send!If you don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t need a gift contactOwner!
shell:
The picture above shows the two sides of the leg buckle. The outside is similar to the EVO. It uses an asymmetrical bevel design. The inner fixing part needs to be pulled from the inside to the outside to loosen the buckle. This design can avoid the buckle during collision. Loosening occurs.
HAWKThe bottom of the shoe also has a hollow design to match the vent hole at the bottom of the inner boot(The position of the vent hole of the inner boot is consistent with the position of the vent hole of the outer shell)Enhances the air flow, so you won’t feel too stuffy when playing, and can also enhance the air flow when you’re not playing and reduce the growth of bacteria.
Inner boots:
HAWKThe inner boot does not use a single filling material. The filling material can be seen at this stitching. After observation, the outer layer of the filling material is filled with a relatively hard and not easily deformed material. The basic shape of the boots is basically fixed by this material. This layer of material will be filled with some sponge-like fillers for cushioning. It is worth mentioning thatHAWKLike some shoes, the inner boots are not blindly stuffed inside, so that the inner boots of the shoes slowly expand to adapt to the user’s feet, but different parts have different thicknesses, and the thickness is very high. Appropriate, so basically there will be no obvious expansion
Tool holder: and Beta tool holder.231 and 243MM rack, banana wheel
Wheels: wear-resistant brake wheels with a hardness of 85A
Bearing: ABEC-5