For today''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s high-end enthusiasts, Gigabit NICs are often difficult to meet higher demands. 10 Gigabit or single-port 5 Gigabit NICs are too expensive and scarce. Dual-port aggregation 2.5G Gigabit is a relatively balanced choice. Today, considering the high-end platform''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s love for GRIS network cards, this can be regarded as a starting point for the popularization of 2.5 Gigabit dual-port convergence.
GE-E013-8125B-2 This general-purpose 2.5Gbps Ethernet PCI Express card can switch out a standard RJ45 network port through the PCIE x1, x4, x8 or x16 slot of the host. Designed for speed requirements in e-sports games. It supports high-performance dual-channel network and full-duplex communication to achieve a transmission rate of up to 2500Mbps. It is compatible with existing Ethernet and is a good solution for consumers to upgrade their 2.5G network. It fully supports the IEEE802.3bz 2.5GBASE-T standard specification, the full-speed transmission rate is 2.5Gbps, and it can be achieved using ordinary Cat.6 network cables. Of course, it also needs to be equipped with an ideal bandwidth and wiring environment, and it is backward compatible with Gigabit and 100M. Specification. In addition, it also supports Lag and Latency Reduction (Lag and Latency Reduction), Advanced Stream Detect 2.0 (Advanced Stream Detect 2.0) and other characteristic technologies. It is officially claimed that the game delay during multitasking is more than 3 times lower than that of ordinary network cards. Network packet processing performance It is also more than 3 times higher; the first is GameFast, which can suspend other unnecessary network transmissions when playing online games, and can release 10% of processor resources and 20% of memory resources. The second is the intelligent engine, which can automatically analyze the network status and settings, and provide a full-speed optimization method to ensure a better experience of online games. 2.5GbE and more advanced 5GbE belong to the IEEE 802.3bz-2016 standard and support Cat6 twisted pair copper cables. The Ethernet transmission rate of 10GbE belongs to the 802.11ae-2002 standard, which requires a more advanced Cat6A network cable. The single-port 2.5G network card is equipped with a standard RJ45 network port, and the data transmission rate is as high as 10/100/1000M/2.5Gbps. It supports 1-LANE 2.5/5Gps PCI Express bus, supports PCI Express 2.1, supports 2.5G and 1Glite modes, and automatically detects 10/100/1000M/2.5Gbps data rates.
REALTEK RTL8125B INTEGRATED 10/100/1000M/2.5G ETHERNET CONTROLLER FOR PCI EXPRESS APPLICATIONS
Overview
PCI Express RTL8125B 2.5G Network adapter, is combines a four-speed IEEE802.3 compatible Media Access controller with a four-speed Ethernet transceiver, it is complies with the IEEE802.3u specification for 10/100Mbps Ethernet ,the IEEE802.3ab specification for 1000Mbps Ethernet and IEEE802.3bz specification for 2500Mbps Ethernet. Also it offers high-speed transmission over CAT5e UTP cable OR CAT3 UTP(10Mbps only)cable .it is suitable for multiple market segments and emerging applications, such as desktop, workstation, server, communications platforms, and embedded applications.
Features
Integrated 10/100/1000M/2.5G transceiver
Supports 2.5G and 1G Lite mode
Auto-Negotiation with Extended Next Page capability
Support PCI Express Specification Revision 2.1
Supports pair swap/polarity/skew correction
Crossover Detection& Auto-Correction
Supports 1-Lane 2.5/5Gbps PCI Express Bus
Supports hardware ECC(Error correction code)function
Supports hardware CRC(Cyclic Redundancy Check)function
Supports PCI MSI (Message Signaled Interrupt)and MSI-X
Supports ECMA-393 ProxZzzy Standard for sleeping hosts
Wake-On-LAN and"RealWow!"Technology (remote wake-up)supports
Compatible with IEEE802.3,IEEE802.3u,IEEE802.3ab
Supports IEEE1588v1,IEEE1588v2,IEEE80.2AS time synchronization
Supports IEEE802.1Qav credit-based shaper algorithm
Supports IEEE802.1P Layer 2 Priority encoding
Supports IEEE802.1Q VLan tagging
Supports IEEE802.3az-2010
Supports IEEE802.3bz-2016(NGBASET)
Supports full duplex flow control(IEEE802.3x)
Supports jumbo frame to 16K bytes
Supports Virtual Machine Queue(VMQ)
Supports quad core Receive–Side Scaling(RSS)
General specification
Controller Realtek RTL8125
Bus type PCI Express Revision 2.1
Bus width 1-Lane 2.5/5Gbps PCI Express Bus
Connectors 2 x RJ45 Copper
Data rate 10/100/1000M/2.5G
Network Standards
Physical Layer Interface IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 1588v1, IEEE 1588v2, IEEE 802.1AS
IEEE 802.1Qav, IEEE 802.1P, IEEE 802.1Q VLAN tagging, IEEE 802.1ad Double VLAN
IEEE 802.3az (Energy Efficient Ethernet), IEEE 802.3bz (2.5GBase-T), Full Duplex flow control (IEEE 802.3x)
Operating System Windows Vista / Sever2008 / Sever 2012 / Windows 7 / Windows 8 / Windows 10
Linux, DOS
Applications PCI Express 10/100/1000M/2.5G Ethernet on Motherboard, Notebook, or Embedded systems.
Hardware& environment
LED Indicators LED Blinking Frequency and Duty Cycle
Operating temperature 0°C to 70°C
Storage temperature -55°C to 125°C (-40°F to 158°F)
Storage humidity Maximum: 90% non-condensing relative humidity at 35°C
REALTEK RTL8125 integrated 10/100/1000M/2.5G Ethernet controller for PCI Express applications
Overview: PCI Express RTL8125 2.5G network adapter, which combines a four-speed IEEE802.3 compatible media access controller with a four-speed Ethernet transceiver, conforms to the IEEE802.3u specification for 10/100Mbps Ethernet, and is used for 10/100Mbps Ethernet The IEEE802.3ab specification of the Internet. IEEE802.3bz specification for 1000Mbps Ethernet and 2500Mbps Ethernet. It also goes through CAT5e UTP cable or CAT3 UTP(10Mbps only)The cable provides high-speed transmission. It is suitable for multiple market segments and emerging applications, such as desktops, workstations, servers, communication platforms and embedded applications.
product features
Integrated 10/100/1000M/2.5G transceiver
Support 2.5G and 1G Lite mode
Auto-negotiation with extended next page function
Support PCI Express specification revision 2.1
Support pair exchange/polarity/skew correction
Cross detection and automatic correction
Support 1-Lane 2.5/5Gbps PCI Express bus
Support hardware ECC(Error correction code)Function
Support hardware CRC(Cyclic redundancy check)Function
Support PCI MSI(Message signal interruption)And MSI-X
Support ECMA-393 ProxZzzy standard for sleep host
Wake on LAN and“RealWow!”technology(Remote wakeup)support
Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab
Support IEEE1588v1, IEEE1588v2, IEEE80.2AS time synchronization
Supports shaping algorithm based on IEEE802.1Qav credit
Support IEEE802.1P layer 2 priority coding
Support IEEE802.1Q VLan mark
Support IEEE802.3az-2010
Support IEEE802.3bz-2016(NGBASET)
Support full duplex flow control(IEEE802.3x)
Supports jumbo frames of 16K bytes
Support virtual machine queue(VMQ)
Support quad-core reception–Side zoom(RSS)
General specification
Controller Realtek RTL8125B
Bus type PCI Express revision 2.1
Bus width 1-Lane 2.5/5Gbps PCI Express bus
Connector 2 x RJ45 copper
Data transfer rate 10/100/1000M/2.5G
Network standard
Physical layer interface IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 1588v1, IEEE 1588v2, IEEE 802.1AS
IEEE 802.1Qav, IEEE 802.1P, IEEE 802.1Q VLAN tagging, IEEE 802.1ad Double VLAN
IEEE 802.3az(Energy-efficient Ethernet), IEEE 802.3bz(2.5GBase-T), Full-duplex flow control(IEEE 802.3x)
Operating system Windows Vista / Sever2008 / Sever 2012 / Windows 7 / Windows 8 / Windows 10, Linux, DOS
Application PCI Express 10/100/1000M/2.5G Ethernet on motherboards, laptops or embedded systems.
Hardware and environment
LED indicator LED blinking frequency and duty cycle
Working temperature 0°C to 70°C
Storage temperature -55°C to 125°C(-40°F to 158°F)
Storage humidity: 35°90% non-condensing relative humidity at C