Modern characteristics:
1. Plug in the 220V power socket directly without a transformer, which is simple and convenient.
2. The motor starts fast, the current is small, the temperature is low, and the service life is more lasting.
3. Separate the line board from the host, which is more reliable and safer to use.
4. Tibetan tensile lines in the power cable make the power cord more difficult to be pulled and broken.
5. Imported alloy steel rises, abrasion resistance, and long service life.
6. Alloy steel gear group, good abrasion resistance, low torque attenuation.
7. The shell adopts engineering plastic, which is resistant to impact, anti -fall, and not easy to damage.
8. Flowing appearance, comfortable hand, long -term operation is not easy to fatigue.
9. Simple and bright colors make work easier.
Scope of application:
Household appliances, toys, electronics, digital, communication, gifts, hardware and other industries quickly tighten or disassemble the screws.
Steps:
1. When installing the screwdriver head, first press the tightly set on the screwdriver, insert the knife head to the U -shaped slot, and then let the tight suit loosely reset it automatically. The knife head has been stuck.
2. Insert the wire plug into the 220V power socket.
3. Adjust the front and reverse open switch to the required position.
4. Rotate adjustment set to the adjustment of the required torque. (Clockwise adjustment of the torque increases, and the torque of torque is reduced counterclockwise)
5. Press the button to start the motor to tighten or disassemble the screw. When the screw knife is tightened to the set torque, the clutch will break away from the separation, the motor stops working, and the screw knife stops turning.
Precautions:
1. Must work with a circuit with ground wires.
2. Except for tightening or disassembling screws, screw knife is avoided for other purposes.
3. When the screw knife is not used for a long time, it should be removed from the power socket.
4. Can not be used in the environment of humid, corrosive gases and high dust.
5. Do not close to flammable explosive items when using it, and you must not contact organic solvents.
6. Avoid contact with sharp objects and heat sources to avoid damage to the motor.
7. Do not change the front and reverse switches during the operation of the motor to avoid damage to the motor.
8. During use, the motor cannot be caused by overheating. Generally, the frequency of use within one minute should not exceed 15 times.
9. The gear box should supplement the special gear oil specified by the company after more than 1200 hours.
10. During the use process, if there is a failure, you should go to the company''s designated maintenance point for maintenance.