Notebook water cooling simple set
A package uses thermal conductive silica gel to stick copper pipe(Simple operation, but general thermal conductivity)
Package B uses tin paste to weld copper pipes (Very good heat conduction, it is more difficult to modify)
4*3 flat copper tube
Round tube part 4mm outer diameter, inner diameter 3MM, flat part thickness 2.5MM,
The width of single root is 5.5MM, and the width of loop pipe is 11MM.
The water tank can be placed on the table with a 5V water pump. The difference between the laptop and the bucket is preferably within 30CM
USB water pump: 5V, 2 watts, head 0.6 meters, flow rate 100ML per hour
If the drop between the bucket and the computer is greater than 60CM, please use a 12V water pump, otherwise the water cannot be pumped.
12V water pump: 3 watts, head 1.8 meters, flow rate 180L per hour
Related video tutorials newbies must see
http://v.youku.com/v_show/id_XMTYzMzA1NzM5Mg==.html (Modification video)
http://v.youku.com/v_show/id_XMTMxNTg4MjIxMg==.html (Fixing method video)
http://v.youku.com/v_show/id_XMTYyMzI0NTg5Mg==.html (Length measurement, bending, soldering video)
Thermal glue set below
The soldering kit is as follows:
The pipeline connection diagram is as follows:
The finished product picture is as follows:
About logistics: Our store defaults to send YTO Express, if you need other express, please consult the express price difference, the delivery time is
At 6:00 pm, YTO Express usually picks up the items at 6:00 pm, and will update the logistics status of the order after 8:00 pm, please don’t worry, this is based on the specific operation of logistics, orders before 5:30 are generally sent out on the same day when they are in stock For other situations, please communicate with the shopkeeper. Orders after 5:30 will be sent out the next day.