High quality heat shrinkable tube K-102 black
specification(MM): 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 20, 22, 25, 28, 30, 35
There is a corresponding heat shrinkable tube pattern under the description, and the customer can see it by pulling down the mouse ·Thank you! ; Remarks, the heat shrinkable tubes in the store are all the inner diameter size, and they are all the size before shrinking. The purchase principle is to buy the tube as large as you want. The shrinkage ratio is 2:1. For example, the inner diameter is 6mm, and it can shrink to 3mm after heating; if you don’t understand, just ask customer service. Heat shrink tubing has been used by many factories for a long time, and the quality is 100% so you can rest assured
Supplement:Price is one meter price
note:Single specificationNumber of shots1 itemequal1 meter, the whole piece is not cut off within the packing volume;
Temperature range: -55℃~125℃;
Temperature resistance rating: 125℃;
Rated voltage: 600V;
Full shrinkage temperature: 110℃
Shrinkage ratio:Transverse shrinkage rate ≥50%, longitudinal shrinkage rate ≤8%;
Product color: black;
Tips for use: small diameter and short lighter can be used to complete the shrinkage; large diameter or longer heat shrinkable tubes can be used for batch shrinkage treatment with hot air cylinder/heat gun;
Product features: excellent flame retardant, environmental protection, insulation, softness, stable performance, low shrinkage temperature, fast shrinkage, etc.;
Application range: Widely used in wire connection, solder joint protection, wire end, wire harness, electronic device protection and insulation treatment; metal products rust and corrosion treatment, wire marking or color marking, etc.
Shrink parameter reference:Φ2(Inner diameter before shrinking: 2.5±0.2mm, wall thickness: 0.20±0.08mm, inner diameter after fully shrinking: ≤1.00mm, wall thickness: 0.42±0.08mm)