번역 T6：【 공기계 전기 없음 이케 노 충전기 】
원문 T6：【裸机无电池无充电器】 可配18650电池
번역 T6 공기계 ：【 매치가능 26650 및 18650】
원문 T6裸机：【可配26650和18650】 无电池无充电器
번역 L2：【 공기계 전기 없음 이케 노 충전기 】
원문 L2：【裸机无电池无充电器】 可配18650电池
번역 L2 공기계 【 매치가능 26650 및 18650】
원문 L2裸机【可配26650和18650】 无电池无充电器
번역 T6: 하나의 힘 1 회 충전
원문 T6:一电一充 配18650电池
번역 T6: 두 번째 힘 1 회 충전
원문 T6:二电一充 配18650电池
번역 L2: 하나의 힘 1 회 충전
원문 L2:一电一充 配18650电池
번역 T6: 두 번째 힘 1 회 충전 + 자동차 클립
원문 T6:二电一充+车夹 配18650电池
번역 T6: 두 번째 힘 1 회 충전 + 기프트 패키지
원문 T6:二电一充+礼盒 配18650电池
번역 T6 공기계 +1 배터리 +1 충전기
원문 T6裸机+1电池+1充电器 (配26650电池)
번역 L2: 두 번째 힘 1 회 충전
원문 L2:二电一充 配18650电池
번역 L2 두 번째 힘 1 회 충전 + 자동차 클립
원문 L2二电一充+车夹 配18650电池
번역 L2 두 번째 힘 1 회 충전 + 기프트 패키지
원문 L2二电一充+礼盒 配18650电池
번역 L2: 공기계 +1 배터리 +1 충전기
원문 L2:裸机+1电池+1充电器 (配26650电池)
번역 T6 공기계 +2 배터리 +1 충전기
원문 T6裸机+2电池+1充电器 (配26650电池)
번역 T6 공기계 +2 배터리 +1 충전기 + 기프트 패키지
원문 T6裸机+2电池+1充电器+礼盒 (配26650电池)
번역 L2 공기계 +2 배터리 +1 충전기
원문 L2裸机+2电池+1充电器 (配26650电池)
번역 L2: 공기계 +2 배터리 +1 충전기 + 기프트 패키지
원문 L2:裸机+2电池+1充电器+礼盒 (配26650电池)
【Product number】: TM-006
【Lamp bead model】: CREE T6/L2
【Lens material】: Optical convex lens
【Working gear】: 5 files
【Applicable battery】: 18650 or 3 sections No. 7
【Luminance】: 1000 lumens
【product material】: Aluminum alloy
【Operating Voltage】: 3.7V
【Light source color temperature】: 6000K
【color of the product】:black
【Product light cup】:no
【Can directly charge】:no
【Whether to adjust the focus】: Telescopic focusing
【product weight】：125g
【Features】:
1. CREE T6 lamp beads imported from the United States, the highest brightness is 1000 lumens, and the service life is 100,000 hours;
2. Convex lens: Eagle eye convex lens, good light transmission performance, not easy to damage, strong aluminum attack head to protect the lens from wear;
3. Telescopic zoom: stretch the head left and right to zoom, astigmatism-concentration mode, convenient to use in different situations;
4. Tail switch: high-quality natural rubber material, non-slip surface treatment, light touch switch to switch the lighting mode;
5. Battery contact: Copper-plated cylindrical battery contact design, copper has good electrical conductivity, which can effectively prevent poor contact.
One. Switch instructions
1. The battery is positive facing inward（Over the lamp holder）, The negative electrode faces outward（Tail）.
2. The switch is at the rear, the switch function is the switch function, and the lightly press the switch is the dimming function.
two. Circuit board instructions
1. Our torch adopts advanced voltage-stabilized and constant-current technology, which can effectively solve the requirements of LED torches for voltage-stabilized and constant current.
2. Special tips: a. Do not use overvoltage, and the voltage should not exceed 4.2V. b. The positive root of the battery is facing forward, do not put it backwards, otherwise it will burn the board. c. Pay attention to the temperature change of the flashlight to ensure heat dissipation. d. Non-professionals Do not open the circuit board
3. Warranty description: Open or processed circuit boards are no longer covered by the warranty.
three. Lithium battery instructions
1. Lithium battery characteristics: Lithium batteries and mobile phone batteries have completely different charging methods; lithium batteries have no memory and can be charged at any time, do not overcharge or over discharge.
2. The first charge is 6 hours at least, and then the green light on the charger will be on. There is no need to overcharge.
3. Special reminder to use “three-proof”charger with anti-overcharge, anti-reverse connection and anti-short circuit;
4. If the battery is not used for a long time, it should be fully charged and stored. Normally, it should be charged and discharged again in about three months;
four. Instructions for use of torch
1. When the torch is in use, choose according to the voltage and battery requirements of the torch. Do not use it indiscriminately to prevent the circuit board from burning. Do not use batteries of different models and voltages at the same time.
2. In use, turn off the torch when the brightness of the torch changes significantly to prevent over-discharge of the battery.
3. Heat dissipation skills: ensure heat dissipation during the use of the flashlight. When it is strongly required that the battery is fully charged, it is best to use the second gear first, so that the lamp holder and battery of the torch can extend the life of the product! Do not direct the light of the flashlight into people''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s eyes. It is super bright and dazzling, so as not to affect vision, especially children.
Fives. Troubleshooting
1. Check the battery: make sure that the battery is charged and installed in the correct direction. Do not use batteries of different brands, and do not mix old and new batteries.
2. Check the tail cover: make sure that the switch has been tightened and the contact is good, and the copper pillar of the tail cover is in good contact with the metal sheet of the tail cover pressing ring. Pay attention to whether the lamp cap is loose.