Individual system might want to install the drive software Intel Intel drive network disk download link: https://pan.baidu.com/s/1XWKK9JBDRB6SNCCEJGKKWQ password: E8QJ; you can use the driver wizard to update; you can also download: https: // DownloadCenter. Intel.com/zh-cn
GE-I210A-POE is based on an INETL I210 chip basis, developed a PCI Express X1 single-port PoE + Gigabit Ethernet image capture card, which is compatible with PCIe X4, X8, X16 channel. It also supports the IEEE802.3AF, IEEE802.3AT protocol, and each port supports a 30W power supply, which can be powered by remote devices.
GE-I210A-POE server adapter card design Mainly designed to use industrial on-site visual inspection servers and equipment, visual site clients, fast mobile Ethernet data transmission equipment, etc., and also apply to ordinary servers and workstations.
Supports PCI-Express host interface specifications with 2.5GT / s bus width V2.0
Comply with the PCI bus power management interface specification REV1.2
PCI-Express channel: x1
Support double port RJ45, full-speed transmission speed up to 1Gbps
Compliance with IEEE802.3AB, IEEE802.3U and IEEE802.3 specification
IEEE80.23AF, IEEE80.23AT network standard
30W power supply can support each port
Support for supply voltage: 44-57VDC
Half-duplex and full-duplex operations running at 10 / 100MBP at all supported speeds
Layer 2 function: IEEE 802.3X stream control - IEEE 802.1Q VLAN
Support receiving end zoom(RSS)
Support IPv 4, IPv 6 protocol
Support up up to 9.5k giant frame
Support UDP.TCP and IP checksum uninstallation
Management and RMON statistics
Support virtual machine device queue
Next generation VMDQ support(8VM)
Interrupt throttling control can limit the interrupt rate and increase CPU usage
Chipset: Intel i210
Transmission medium: 1 x rj45(Copper cable, PoE power supply is required to require CAT5)
Transmission rate: 1000 / 100Mbps
MAX Power: 30W / Ports
Power supply voltage: 44-57VDC
Network Topology: 1000Base-T Gigabit Ethernet / 100Base-T Fast Ethernet
IEEE 802.3ab, IEEE 802.3u, IEEE 802.3af power over ethernet
IEEE 802.3af power over ethernet enhancements
IEEE 802.3Q VLANs, IEEE 802.3 Full Duplex and flow control
IEEE 802.3az - Energy Efficient Etherner (iEEE)
Features: Adaptive to the power output required for external devices: Class 0, Class 1, Class 2, Class 3, PXE, SR-IOV, IPSec Desired, IPv4 / IPv6, Giant Frame and RSS Support
System requirements Win 7 / Server2012 / Server2008 / Win 8 / Win 8.1 / Server2016 / Win 10, 32 / 64bit, FreeBSD, Linux, VMware ESXi
Gigabit LAN CARD intel I210 CHIPSET
Supports 10/100/1000Mbps Nway Auto-Negotiation
Supports 10/100Mbps full and half duplex, 1000Mbps,full duplex
Supports Full Duplex Flow Control (IEEE 802.3x)
Supports IEEE 802.1P, IEEE 802.1Q VLAN tag
Supports Jumbo Frame
Supports Auto-MDI/MDIX
supporting remote boot
Supports ACPI, PCI power management
Contain two large independent receive and transmit
FIFOs
One STP/UTP connector
Provides LEDs to indicate network Link/Activity/Speed/Duplex
Standards and Protocols: IEEE 802.3, 802.3U, 802.3Ab, 802.3X, 802.1Q, 802.1P
CSMA/CD, TCP/IP, PCI Revision 2.1/2.2
Transmission Rate: 10/100 / 1000Mbps for HALF-DUPLEX MODE
Flow Control: IEEE 802.3x Flow Control (Full-Duplex)
Ports: 10/100 / 1000Mbps RJ45
tNetwork Media
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100O STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100O STP (maximum 100m)
1000Base-T: UTP category 5, 5e cable (maximum 100m) 1000Base-T: UTP category 5, 5e cable (maximum 100m)
LED Indicator ;1000M Link/Act, 100M Link/Act, 10 Link/Act, Duplex
Environment:
Operating Temperature: 0 ° C ~ 40 ° C (32 ° F ~ 104 ° F)
STORAGE TEMPERATURE: -40 ° C ~ 70 ° C (-40 ° F ~ 158 ° F)
Operating Humidity :10% ~ 90%, non condensation
Storage Humidity : 5%~90% non-condensing
Operating System
Windows 95/98 / ME / NT4.0 / 2000/2003 / XP / Vista, WIN7 / WIN8 / WIN10, MAC iOS. NetWare, Linux